Part Number: ADS8578S Hi,
Can I use a single MCU pin to drive CSn and CONVSTA / CONVSTB pins on ADS8578? Datasheet mentions a minimum of 10ns delay requirement between CSn rising edge to CONVSTA / CONVST B rising edge. I have all three inputs controlled…
Part Number: ADS8578S Hello,
I am trying to find is the ADS8578S data sheet information about setting the gain of the integrated PGA, and I cannot find any information on it. How do I set the gain of the Programmable Gain Amplifier?
Thanks,
Eric.
Part Number: ADS8578S Other Parts Discussed in Thread: ADS8588H , Dear Sir,
I planned to use an IC on my custom PCB which was ADS8588H. Due to unavailability issues, I've checked for the alternatives and found ADS8578S is the substitute which is available…
Part Number: ADS8578S Dear sir,
Request you to help me with following queries:
I am programming ADS8578S with 14 bit 8 channel ADC with TMS320F28235PGFA DSP.
I am trying to read data in parallel interface mode.
For this I have made PAR/SER/BYTE SEL pin…
Part Number: ADS8578S Dear sir,
Request you to help me with the following queries:
I am Programming the IC from FPGA.
1.no oversampling, stby PIN high, range PIN high, reset controlling from Fpga
2.i want to read the data of 8 channels from douta in serial…
Part Number: ADS8578S Hello Dale,
All the signals are coming as per the datasheet but i get first data signal is exact reverse and look like a parallel data reading. i communicate with serial interface mode, how to rectify the problem?
Part Number: ADS8578S we have done a new design with 8578s IC. we have designed the IC for serial mode of operation my making PAR/SEL=1,DB15=0.we are using CONVSTA and CONVSTAB tied together and from fpga we are making high and low with 10 micro seconds…
Part Number: ADS8578S Hi,
what's the main difference between AD7607? and does customer need to change software when change from AD7607 to ADS8578?
thanks.
Part Number: ADS8578S How are the digital output pins selected for the serial interface mode on the ADS8578S?
The datasheet shows that the serial interface mode allows the ADC to output through either DOUTA, DOUTB, or both pins at once. I have not been…