Search tips
Showing 14 results View by: Thread Post Sort by
    Answered

  • RE: ADS8695: LPF bandwidth question

    Resolved
    Hi Tess - how many channels are required for this application? We have an 8-channel device in preview now which includes a similar integrated AFE with selectable low-pass filter bandwidth (21 kHz and 400 kHz). This device has two ADC cores, each with…

  • ADS8695: ADS8695 meausre value is not fellow set value

    TI Thinks Resolved
    Part Number: ADS8695 I used ADS8695 in my DAQ system. After my test, I found a problem: The ADC value is bigger than the set point value. The test data is below： Set value ADC value ADC value to calculation 0 0 0 4.183…

  • ADS8695: SPI example code for ADS8695

    Part Number: ADS8695 Other Parts Discussed in Thread: ADS8681 Dear Customer ask whether we have SPI example code for ADS8695 can be their reference? Thanks. They meet a issue that whatever they set the ADS8695 register value, the read sample value always…

  • ADS8695: ADS8695

    TI Thinks Resolved
    Part Number: ADS8695 I am using ADS8695 in my project. 2. The IC is functioning properly at room temperature. But when i am soaking it at 71 degC, the outputs are getting stuck to their higher values (approx. double of the input). In this case inputs…

  • ADS8695: ADS8695 ：what's the address of the data register?

    TI Thinks Resolved
    Part Number: ADS8695 hello, the read command is 11001_xx_<9-bit address>_00000000_00000000, but i can't find the introduction of the data register int the datasheet, how can i read the data from ads8695? thank u.
    • Answered

  • ADS8691: IBIS model for ADS8691

    Resolved
    Part Number: ADS8691 Other Parts Discussed in Thread: ADS8695 , ADS8699 , ADS8681 Hello, is there an IBIS model available for the ADS8691? or the ADS8695? or ADS8699? Regards, Niels
    • Resolved

  • [FAQ] ADS8681: Solution for detecting input floating on SAR ADCs - ADS8681/ADS8688/ADS8686/ADS8588S

    Part Number: ADS8681 Other Parts Discussed in Thread: ADS8699 , ADS8685 , ADS8665 , ADS8661 , ADS8689 , ADS8691 , ADS8675 , ADS8695 , ADS8671 , ADS8684A , ADS8664 , ADS8688A , ADS8698 , ADS8688AT , ADS8688 , ADS8678 , ADS8674 , ADS8684 , ADS8694 , ADS8668 , ADS8586S , A…
    • Answered

  • RE: ADS8685: Register Setting Ranges - Question on Table 6

    Resolved
    Hi Darren, For table 6, the input alarm flag D[9:7] should be corrected to D[9:8], this is a literal error and should be updated in the future. A same table in ADS8695/8691 datasheet is correct, these are ADCs in the same family, FYI: The table 7 is…
    • Answered

  • ADS8689：Acquisition data is strange

    Resolved
    Part Number: ADS8689 Other Parts Discussed in Thread: OP07 , ADS8695 There is a 10% error in the data obtained from the output of ADS 8689. Is there any cause? The initials are set to unipolar 0V ~ 10V. After sending the command [32'b1101_0000_0001_0100_0000_0000_0000_1001…
    • Resolved
    • Answered

  • RE: ADS8515: ADS8515 Analog to Digital Converter internal voltage reference of 4.096V

    Resolved
    Hi Ken, ADS8515 does not fit your new requirement, it has a internal 4.096V voltage reference with a very narrow range(4.076V to 4.116V). Also, the external reference voltage range is from 3.9V to 4.2V(4.096V typ is expected as well). There are two solutions…

Didn't find what you are looking for? Post a new question.