Part Number: ADS8912B Hello team,
I have a question about ADS8912B tht_CKCS.
What will happen in case we don't meet its minimum requirement(7ns) especially when reading data?
Last bit of data may be invalid depending on SPI protocol?
Best regards…
Part Number: ADS8912B Hello team,
I have a question about power-on-reset requirement of ADS8912B.
I think ADS8912B has power on reset feature and RVDD is important for the feature when power up.
Could you let me know if there is any requirement…
Part Number: ADS8912B Hello team,
I think ADS8912B can work with 1.8V interface by supplying 1.8V as DVDD. Is it correct?
Datasheet 6.3 Recommended operating condition mentions two conditions, "Operating" and "Specified throughput".
What is "Specified…
Part Number: ADS8912B Hello team,
My customer wants to omit SDI line to reduce interface line of ADS8912B. Can we omit SDI line?
In this case, ADS8912B will work normally with SPI-00-S, correct?
Also, could you let me know if there is anything that…
Part Number: ADS8912B Other Parts Discussed in Thread: 66AK2G12 We are planning to use this ADC ADS8912B as a SPI master, for automating the data collection in to RAM without disturbing the processor. But there is no much information available in the…
Part Number: ADS8912B Hi,
Let me ask you following basic questions about AC accuracy.
Q1) According to the datasheet, SINAD and SFDR specifications are as below.
SINAD : 102.5dB(typ)
SFDR : 125dB(typ)
I do not understand why SFDR is better than…
Part Number: ADS127L18 Other Parts Discussed in Thread: OPA320 , ADS8912B , OPA2320 Tool/software: Hello, I am currently working on a signal conditioning circuit where I plan to use the ADS127L18 at the end of the analog signal chain. I plan on configuring…
Hi Team,
After did some experiments then we almost can confirm that the issue is caused by input common mode shift.
1. Remove OPA2197 and ADS8912B, apply 5V differential voltage at input side of THS4551 and THS4551's output is 1.78V that is a normal…
Part Number: ADS8900B Tool/software: Good morning,
For a project, I need to minimize connections to and from the ADS8900. As there is no requirement for a specific conversion start time, I wanted to connect CS_N and CONVST together as shown in the minimum…
If your truly interested why 1/2 LSB settling even though it seems an MSB issue, PDF below link is an excellent 2018 source.
/cfs-file/__key/communityserver-discussions-components-files/908/TI_2D00_Analog-Engineers-circuit-cook-book-slyy138.pdf
