Part Number: AWR1642 I am having some trouble to configure the lab_004 of the automotive toolbox with a greater range. Using the default configuration the range is 0 to 2m, when accordingly to the calculus it should 11m like its explain in the following…
Part Number: AWR1642 Hi，
I test the radar outside, but it detect something velocity is not 0 m/s, in fact, the object around all is stop. Do certain materials affect the phase of reflected waves? Or what else would affect his calculations?
Thank you
Hi,
I tried running the demo on 2 boards. both of them had the same issue. Not able to successfully debug, in the case of the demo, as I mentioned earlier in the post it will run for like nearly 1 min and then will stop. I think its because of some error…
Part Number: AWR1642 Hi team,
in the driver code, customer have the question on the message ram initialize for MCAN and DCAN driver.
Why the DCAN driver need to initial the message RAM, but MCAN didnot need this? As the TRM descript, both driver had…
Part Number: AWR1642 Hello,
I have a question about converting range-doppler heatmap value to dB scale. In the older demoVisualizer, e.g. version 3.1.0, the formula for AWR1642 is (value*6)/(256*numVirtAnt). Please refer to the URL below. e2e.ti.com/...…
Part Number: AWR1642 Actually we are developing a system to measure the distances outdoors accurately(as accurate as possible), the target is stationary and since it is outside it might be covered with layer of snow/dirt/mud. after reading the forum/datasheet…
Part Number: AWR1642BOOST-ODS Other Parts Discussed in Thread: AWR1642 Dear Expert ,
Good day!
Our customer use the T AWR1642 BOOST ODS, he test the demo which link below
https://dev.ti.com/tirex/explore/node?a=AocYeEd__2.9.1&a=VLyFKFf__3.6.2&node=AFeCagqbt7…
Hi,
We have not done further experimentation on this. I would recommend reading the TRM chapter on CANFD and experimenting with the values to get this working. I have spoken internally, and the team has indicated that CANFD should work with 100kbps,…
