Part Number: BQ25120A Other Parts Discussed in Thread: BQ21062 ,
I was going through the datasheets of BQ25120A and BQ21062, but couldn't locate graphs/tables containing the efficiency of the LDO inside it. Can anyone please help me with the required…
Part Number: BQ25155 Other Parts Discussed in Thread: BQ21062 , BQ25120A , BQ21061 , BQ25180 Looking through the datasheet for the BQ25155, it is clear that you can set the output voltage of the LDO regulator to be any voltage between 0.6 and 3.7 volts…
Hi Gautham,
Thank you for prompt support.
Sorry for typo. Let me clarify Q2.
2. In table Table 9-5. Function Availability Based on Primary Mode of Operation, why don't BATOCP function be enable during low power mode ? It should protect battery because…
Part Number: BQ25606 Hello TI Community,
I'm using the BQ25606 Standalone 3.0-A Single Cell Battery Charger with a 270mAh battery and a micro-USB connector connected to the VBUS as charger input voltage (D+ and D- left unconnected).
The VSYS output…
Hi Downey,
From the spec it look like this cell follows a CCCV curve of 2.5 - 3.8V. BQ21062 may be OK, you can set the charging voltage to 3.8V. The min precharge threshold is 2.8V. So you would be charging at the precharge value between 2.5-2.8V…
