Part Number: BQ24032A
Hello dear TI,
I'm using the bq24032A in my project, and I've noticed different behaviors between boards. Do you have a tool or calculator for determining resistors and capacitors values?
I've come across a similar issue on…
Part Number: BQ24032A Hi,
It was delayed due to the reproduction of the issue phenomenon.
The AC pin current, out pin current waveform of the defective phenomenon.
Customer report.pptx
Part Number: BQ24032A Hi,
During the defect review, if the defect symptom is reproduced, it has been found that the AC pin on the BQ24032A appears to have a reverse voltage.
Issue:
Output voltage drop in the wireless charging module (Rx module)…
Part Number: BQ24032A Other Parts Discussed in Thread: BQ51020 Hi,
The customer is using the BQ24032A for a Portable 7-inch display product.
System reset and lockup failure occurred during wireless charging, and Log check shows excessive connected…
Part Number: BQ24032A Other Parts Discussed in Thread: BQ51020 Dear TI experts,
My customer tests BQ24032A with their own product. and found a problem.
Could you review the schematic first?
Actually they have 2 input sources to AC pin - DC 5V…
Part Number: BQ24032A Other Parts Discussed in Thread: BQ25180 Dear TI experts,
my customer have a question about BQ24032A.
1. Can BQ24032A charge the battery less than 100%, like 80% and terminate charging status?
2. datasheet says that the battery…
Part Number: BQ24032A Hi team,
Customer is using BQ24032A to power a processor board.
When working with the AC mains without battery, they see the following misfunction:
When the system starts up in some boards, they see a glitch in the power supply…
Part Number: BQ24032A Hello Sir:
We had some failure condition was no charging and abnormal VOUT.
Please refer our measured waveform and schematic as below.
Waveform 1, VAC has input, but has no charging behavior and VOUT voltage was not 4.4V…
Part Number: BQ24032A Hi Team ,
I want to know if AC and USB is not connected and Power is supplied to OUT pin only by BAT , The will we get 3.3V also at LDO output pin?
Because i have read the datasheet and there are two different explanations
…
Part Number: BQ24032A Hi,
I am working on a project in which the system needs to be powered by both AC and USB(One source at a time). The USB port will have serial communication as well. Could there be any problem(in terms of power and communication…