Part Number: BQ24314C Other Parts Discussed in Thread: BQ24308 Hi,
In the datasheet it specifies the the recommendeed operating conditions are:
But then in the appendix 9 it says:
It seems contradictory and misleading. Will my application works if I…
Part Number: BQ24314C Hello TI team,
In our current design we are using a BQ24314C as an Overvoltage and Undervoltage protection for a critical circuit. However, we are not able to fin the UnderVoltage propagation delay in the datasheet.
We have found…
Hi Ankur,
Have you tried to remove the subsystem with the op amp altogether and use a resistor with a power supply to mimic the battery to see if the behavior continues?
Miguel
Hello Anand,
Unfortunately, it does not seem we have the junction-to-board constant (Rjb) for this one in particular. You can still use the values in the datasheet. The datasheet has the R θJA , R θJC and T j(max) values. The following application note…
Other Parts Discussed in Thread: BQ24314C Hi Team,
I would like to ask about ILIM pin of BQ24314C.
My customer confirmed 1.22V at ILIM pin with R_ILIM=20kΩ(Vin=5V). Is this voltage reasonable for BQ24314C? My customer would like to know it.
Best Regards…
Hi Team,
My customer is concerned about device operation at pin to pin short condition about NC pin. He would like to know the dvice operation when NC pin(3) is shorted with VSS pin(2) or #FAULT pin(4). Could you tell me the operation?
Best Regards, Yai…
Hi,
I discussed in a previous email with one of your colleagues about a certain component that I thought it could fit my application, BQ24314C The problem is it only supports Vin = 5V.
My application needs to accept Vin =12V and a current of minimum 100mA…
Part Number: BQ24314 Hi:
We found BQ24314,BQ24314A,BQ24314C three version, but not descripte their difference. could you help explain what differece about them. Our customer don't know which they shoud use. thanks