Search tips
Showing 186 results View by: Thread Post Sort by

  • RE: BQ24735 stops charging after 50 seconds

    Hello Philipp, user507251644 said: The behavior of the charge controller has not changed in any way. I would assume that we have only significantly degraded the EMC behavior. That is unfortunate to hear. I spoke with other team members and we have not…
    • Answered

  • BQ24735: is necessary 4s balancing with 18650 battery?

    Resolved
    Part Number: BQ24735 Other Parts Discussed in Thread: BQ29209 , BQ77915 Hello everybody. I'm evaluation this application: battery powered board 4x 18650 cells single cells has PCM I need to put these cells in series BQ24735 for charger I've onboard…
    • Resolved

  • BQ24735: BQ24735 help check the schematic

    TI Thinks Resolved
    Part Number: BQ24735 Hi Please help check the schematic as below. Joyar_BQ24735.pdf Thanks Star

  • BQ24735: Abnormal power on of BQ24735, unable to generate normal level on pins 3 and 4

    Part Number: BQ24735 Solution: BQ24735RGRR has occasional abnormal power on problem Fault symptom: This fault is caused by occasional system power failure during normal use of the product. The problem may be resolved by shutting down and restarting, or…

  • BQ24735: Issue of PMIC

    TI Thinks Resolved
    Part Number: BQ24735 Hi, We are using BQ24735RGRT PMIC in one of our projects. We performed required tests on PCBA like measuring current on various rails, outputs of regulators used in our design. the PMIC (BQ24735RGRT) output used as sys voltage and…

  • BQ24735: PMIC ACFET Drive Issue

    Part Number: BQ24735 Hi, We are using BQ24735RGRT PMIC in one of our projects. We performed required tests on PCBA like measuring current on various rails, outputs of regulators used in our design. the PMIC (BQ24735RGRT) output used as sys voltage and…
    • Answered

  • BQ24735: ACOK not getting high

    Resolved
    Part Number: BQ24735 Dear Sir or Madam, we use the BQ24735 as a charger for our battery and it works so far. We can set the charger over SMBus and charge the battery. Because we find no information in the registers for reading out the state of the charger…
    • Resolved

  • BQ24735: BQ24735 didn't store data

    TI Thinks Resolved
    Part Number: BQ24735 Other Parts Discussed in Thread: EV2400 Hi Team, Thanks for support We face issue of battery charging when supply off then on. We have set all para meter as per data sheet guidance. First set value through EV2300/2400 SMB connector…

  • BQ24735: BQ24735 battery can not power the system

    TI Thinks Resolved
    Part Number: BQ24735 Hi The customer design the schematic with BQ24735, The single adapter can supply to system normal, but the single battery can not power the system. Battery voltage is 15.8V, system voltage is 15.2V, BATDRV voltage is 15.2v (SRN15…

  • BQ24735: BQ24735 problem

    TI Thinks Resolved
    Part Number: BQ24735 I try to repair laptop ACER SWIFT SF314-51 , which is dead. I found out there is a problem with BQ24735 - ACDRV (pin 4) is only about 0.9V. ( if i remove resistor - coming from that ACDRV to mosfet, value is still not good). Few others…

Didn't find what you are looking for? Post a new question.