Search tips
Showing 10 results View by: Thread Post Sort by

  • BQ25629EVM: BQ25629EVM & USB2ANY

    TI Thinks Resolved
    Part Number: BQ25629EVM Other Parts Discussed in Thread: USB2ANY , EV2400 , BQSTUDIO , BQ25629 Im now a happy owner of the BQ25629EVM and read in the datasheet that I needed the EV2400 or a USB2ANY. Ofcoarse I ignored that, and started on creating my…
    • Answered

  • BQ25629EVM: Thoughts on the power path

    Resolved
    Part Number: BQ25629EVM Other Parts Discussed in Thread: BQ25629 Dear Sirs and Madams, We are considering a system using BQ25629EVM. The basic configuration is the same as the simple configuration of the datasheet. We are supplying 5V to VBUS…
    • Resolved

  • BQ25629EVM: Battery charge with market USB power supply.

    TI Thinks Resolved
    Part Number: BQ25629EVM Other Parts Discussed in Thread: BQ25622 , BQ25629 , BQ25620 Dear Support Team, I need charge a Li_Ion Battery with a current of 2÷3A with the most available USB power supply on the market. I'm check the compatibility wit EVM…

  • BQ25629EVM: BQ25629: Enabling PMID boost mode when powered via battery

    Part Number: BQ25629EVM We are currently facing problems in enabling boost mode to power up the PMID at 5040mV and enabling PMID output Current Status Powered via USB (5V) PMID_GD - Turns on (4.9V) PMID - 4.9V PMID output voltage - 4.9V …
    • Answered

  • BQ25629: Altium layout example files

    Resolved
    Part Number: BQ25629 Pg. 72 & 73 of the datasheet show an example layout for the part. Likewise there is example schematic and layout in the BQ25629EVM datasheet (pg. 10-12). These look like they were drawn in Altium, but I cannot find the design files…
    • Resolved
    • Answered

  • BQ25629: BQ25629 Custom PCB: False I2C response

    Resolved
    Part Number: BQ25629 Other Parts Discussed in Thread: BQ27427 , LP5813 , Hi, We have a custom PCB which follows a similar schematic in the EVM board mentioned in this: https://www.ti.com/lit/ug/sluucq9/sluucq9.pdf?ts=1705993731348 Current status of…
    • Resolved
    • Answered

  • RE: BQ25628EVM: BQ25628

    Resolved
    Hi Laszlo, Please see https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1194490/faq-bq25628evm-bqz-file-for-bq25628-evm?tisearch=e2e-sitesearch&keymatch=BQ25629EVM%253A%2520.bqz%2520file Thanks, Nin…

  • RE: BQ25629: Extra/unexpected ADC Done interrupts

    Hi Dennis, Please see my comments below. I have attempted to replicate your observations on a BQ25629EVM, but I observe expected behavior related to ADC_DONE_FLAG and setting ADC _DONE_MASK. ADC_DONE_FLAG is only ever set after an ADC conversion is…
    • Answered

  • RE: BQ25629: Charger_1_00-bq25629.bqz

    Resolved
    Mark, Please get it from https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1194490/faq-bq25628evm-bqz-file-for-bq25628-evm?tisearch=e2e-sitesearch&keymatch=BQ25629EVM%253A%2520.bqz%2520file Thanks, Ning…

  • BQ25628EVM: BQ25628

    TI Thinks Resolved
    Part Number: BQ25628EVM Other Parts Discussed in Thread: USB2ANY , EV2400 , BQSTUDIO Tool/software: We have ordered the BQ25628EVM for evaluation. Jumper setup is as below. The setup is as below. We have used USB2Any interface board and the…

Didn't find what you are looking for? Post a new question.