Part Number: EV2400 Other Parts Discussed in Thread: BQ27210 , Hi,
Hope somone can advise me.
We currently have an EV2300 programmer, but we want to update our production test systems to use the lastest product EV2400 programmer ideally. Will the EV2400…
Part Number: BQ27210 Other Parts Discussed in Thread: EV2400 , Hi
The customer use EV2400 to connect with bq27X10 EVSW, but can not communicate successfully.
The failure scream as below.
They have changed many computers still have this failure. reinstall…
Part Number: BQ27210 Other Parts Discussed in Thread: BQ27200 , BQ27000 , We are using a BQ27200 Gas Gauge on our product, the .GG file we program is shown below: -
[Device] Name=bq27000 [Configuration] Data Units=Engineering [Gas Gauge EEPROM Constants…
Part Number: BQ27210 Other Parts Discussed in Thread: EV2400 , BQSTUDIO , Our EV2300 in production has failed and we are unable to find a new EV2300 to replace it.
So we purchased the EV2400 and tried to establish communication to using Battery Management…
Part Number: BQ27210 Other Parts Discussed in Thread: BQSTUDIO , EV2400 Hi all,
we are having issues communicating with a BQ27210 BOARD we designed through the EV2300 and the BQ software (dedicated to BQ27xx0).
the battery is communicating with our uC…
Part Number: BQ27210 Other Parts Discussed in Thread: BQEVSW Tool/software: Linux We mounted the bq27210 chip to the imx6 platform via I2C. But using the driver provided on the official website, I did not find information on the current battery level…
Dear Shirish, thank you about your kind answer.
I think BQ27210 and BQ27220 are not compatible. Which means, linux driver for bq27210 is not comatible for bq27220.
Register for SOC for bq27210, RSOC is at 0x0B and CSOC is at 0x2C .
But, Commands for SOC…
Other Parts Discussed in Thread: BQ27210 Hello,
Is it possible to fully program and configure the BQ27210 gas gauge in-circuit without running a full charge and discharge cycle?
Many TI chips support programming via golden image creation, but no such information…
Other Parts Discussed in Thread: BQ27210 , BQSTUDIO , BQ34Z100-G1 , BQ40Z50 , EV2400 Hi all,
we are having a very urgent issue.
we have produced a few tenths thousands of PCBs with BQ27210.
in the last week, the EV2300 doesn't communicate with the "…
Hello Yashavanth, Is the log file you attached supposed to correspond to a full cycle? I'm a bit confused, I see the voltage remain constant for ~1hour with no current. Your RSOC is reported as 100% when your voltage is ~2.4V, at this voltage a Li-ion…
