Hi Yuskue-san,
Here are the remaining reports:
TPS2420RSAR__dflfs05pwr_interfaceSafety CertificationCB_NEMKOCB_UL_P_file.pdf
TPS2420RSAR__dflfs05pwr_interfaceSafety CertificationCB_NEMKOCB_UL_P_test_report.pdf
TPS2420RSAR__dflfs05pwr_interfaceSafety…
Hi,
First of all, your screenshot is really hard to see the detail. In the future, you should attach PDF. From a high level, I don't see a protection diode between the MCU and the RJ45. Without the protection diode the MCU can be damaged only partially…
Hello Hetal,
I attached the design as a pdf so you can see the values.
I started the design with "advanced inputs" , then I changed the inductor, the MOSFETs and output capacitors and C12. What I then wanted to do was to change C12 from 330u to…
Other Parts Discussed in Thread: ADS8168 , ADS8028 , ADS114S08 , ADS1119 , ADS1118 , ADS7042 , ADS122C04 Hi team,
Now I want to find a replacement for LTC1867L which is ADI company device. The datasheet of LTC1867L is in the attach. It is 16bit and…
Thanks for the fast reply. The PD analyzer I am using is CY4500
https://www.infineon.com/cms/en/product/evaluation-boards/cy4500/
The software is EZ-PD Protocol Analyzer utility:
softwaretools.infineon.com/.../com.ifx.tb.tool.ezpdprotocolanalyzer…
Hello,
Thank you for bringing this to our attention. TMDSOSKL137 technical documentation and software is located at the link below and should not require a login. Please let me know if you are able to access it.
http://www.spectrumdigital.com/omap…
Hi Anand,
After introducing the delay, it crashes, immediately.
Pls find the log below.
Best Regards
JK
Trace SetFailureReason enabled
/dev/mem opened.
Phy Addr : 0x48181560 Data : 0x00000002
Unhandled fault: external abort on non-linefetch…
Hi,
Attach the Ultra96 V1 schematic. Our board produced the same. And the current of each power rail cannot be measured. Each Buck did not connect parts such as the INA226, and even if I measure it in another way, I think the measurement values are…
Dear experts,
I was hoping you could provide me with some help getting the ASP with EDMA up and running.
Hardware:
I am using the Davinci-DM644x EVM by Spectrum Digital, but only the DSP side. The ASP is connected to external device, which provides…
