Part Number: BQ29312 Hi, Good day. Our customer would like to know the difference between the BQ29312 and BQ29312A. Also, they want to know if they can use the BQ29312PWR as an alternate to BQ29312APWR. Thank you. Regards, Cedrick
Part Number: BQ29312
Dear all:
Where are there bq80201dbt, bq29312apw datasheet? and the bq80201+ bq29312 power management application circuits?
Thanks!
Part Number: BQ29312 Hello,
we use the BQ29312 for our batteries. What is the typical and maximum input current for the VCx Inputs.(VC1, VC2,VC3,VC4,VC5)?. At one input i measured >1mA with 4.2V and i think the IC on our board is damaged. I didn't find…
Other Parts Discussed in Thread: BQ20Z80 , BQ29312 Is any one familiar with what increases the Max Error, when using bq20z80 and bq29312? Or with what can reset/lower the Max Error?
Other Parts Discussed in Thread: BQ29312 Hi Tiers.
We designed battery-pack using BQ2084+BQ29312.
When battery-pack is not used, battery-pack's capacity is slowly decreased.
So in this case, We want to set sleep mode or ship mode.
But We don…
Other Parts Discussed in Thread: BQ29312 Hi,
My question is quite simple, how do we set the No.of Cells for bq29312 AFE.
I have gone through the bq29312 Datasheet. One line read's -
2-, 3-, or 4-Cell Configuration
In a 3-cell configuration, VC1…
Other Parts Discussed in Thread: BQ20Z80 , BQ29312 , BQ34Z100-G1 , BQ76930 , BQ77908A , BQ78350-R1 We manufacture battery packs and have been using a BMS that utilizes the BQ20Z80 and BQ29312 chip set for a number of years. This BMS can be set up for…
Other Parts Discussed in Thread: BQ29312 Hello, On sluu205 (bq20z80EVM-001), page 12, is writen : the cells should be connected in following order : 4-Cell (in my case) : 1N (BAT-), 1P, 2P, 3P and 4P (BAT+). However, in BQ29312 datasheet, is writen :…
I'm testing this circuit right now and when I remove the Li-Ion power source I notice this chip enters some kind of sleep mode. I've checked the rest of the board and the fuse is still good (as are the MOSFETs). Any advice? I'm following the block diagram…
Other Parts Discussed in Thread: BQ29312 , BQ2060A Does anybody have any experience in using the bq2084 and bq29312 devices for control of NiMH battery packs? Can this be done in a meaningful fashion?
Any response would be greatly appreciated.
Thanks…
