Hello Yjp,
yjp312 said: Pack ON for CHARGING
CHG_EN & DSG_EN are both set.
yjp312 said: Pack ON for DISCHARGING
CHG_EN & DSG_EN are both set.
yjp312 said: Pack OFF while CHARGING
CHG_EN is unasserted & DSG_EN is set. This means that charging…
Part Number: BQ76200EVM-606 Other Parts Discussed in Thread: BQ76200 Hi! Can you verify the schematics for BQ76200 controlling the charge and discharge of battery pack (7 cells series lithium ion).
There is 600 A discharge current. the control signals…
Part Number: BQ76200EVM-606 Other Parts Discussed in Thread: BQ76200 Hi,
I am looking into the schematics of BQ76200EVM-606. What's the consideration of zener didodes(D5~D9) and 1k+39.2k resistors in series of the signal path in this design?
Peiheng…
Part Number: BQ76200EVM-606 Other Parts Discussed in Thread: BQ76200
Hello Team,
I test the BQ76200EVM-606,add 20V voltage between J4 and J1,when CHG_EN = Hi, DSG_EN = Hi, CP_EN = Hi, PCHG_EN = Lo, PMON_EN = Lo.the leakage current value is 180uA,when…
Part Number: BQ76200EVM-606 Dear Sir, Madam,
Do TI complete the FMEA test (short and open test) for the evaluation board? Is there any way to get the test result or report?
Thanks.
Part Number: BQ76200 Tool/software: Design requirement High side NMOS drive tube opening time turn-off time is required within 50US, in order to do short circuit protection. 20 strings of 1 or 2 in parallel with 18650 batteries
Continuous current…
Hi Shaheen,
The BQ76200EVM-606 user guide indicates maxmum current is 15A. This rating was for a lab environment at room temperature. The current for your motor of course depends on the system voltage. If you have a 50V system you may be looking at…
