Part Number: BUF634A Hello! I am looking for a rad-hard high speed buffer that essentially at least matches the specs of the BUF634A. My main concern is that it should have a slew rate of at least 20V/us and be able to drive at least 200 mA through a…
Part Number: BUF634A Other Parts Discussed in Thread: TINA-TI I'm running a simple simulation of the BUF634A in Tina, looking at noise. To measure the current noise, I put a 1 Mohm resistor on the input, and measure the output noise.
Simulating the…
Part Number: BUF634A Other Parts Discussed in Thread: OPA2211A , Hi,
Can you point me to the correct drawing for the DDA package and recommended footprint dimensions please?
For some reason, this package is not included in the datasheet. Also, I noticed…
Part Number: BUF634A I am unclear on what the max voltage I can use for the BUF634AIDR in single supply mode since in the recommend conditions it states max of ±18V, but in descriptions and absolute max it states it can go to 36V.
Would I be able…
Part Number: BUF634A Other Parts Discussed in Thread: OPA1655 Please elaborate on the Output Headroom spec in the datasheet.
Is this saying the Vpp of the output will be around 2V less potential on each the positive and negative supply - so with a +/-12V…
Part Number: BUF634A Other Parts Discussed in Thread: OPA2206
Hi Team,
Good day!
I am posting this in behalf of the customer.
I'm using a BUF634AIDDAR to buffer a 1MHZ 50% square wave (from 0V to 10V). The output of the buffers seems to be correct…
Part Number: BUF634A
Hi,
I was trying to run a spice simulation with the BUF634A high-speed buffer but I get this error.
I imported the BUF634A spice model from the TI webpage.
Thanks in advance,
Part Number: BUF634A Other Parts Discussed in Thread: BUF602 , BUF634
Hi,
I made some observations while testing a BUF634A buffer (in real life). The offset voltage between input and output signal seems to be greater when it is sinking than when it is…
Hello Jerome,
Your feedback on model/schematic/datasheet naming convention is understood. Depending on the model framework, timeline, and modeling engineer, a complete 1:1 parity of model names to datasheet names may or may not exist.
As we revise and…
Part Number: INA1620 Other Parts Discussed in Thread: BUF634A , , OPA1622 , OPA134 , OPA1688 , OPA1678 , BUF634 , OPA1656 I would like some discussion of a dual INA1620 headset driver circuit version of this, higher supply voltage, compared to an op amp/BUF634A…