• 

  Seong Kim

  • 11 months ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  RE: CCS/CC1100: demo program

  Hi jl, You can download version 4 from here -> These are our legacy parts, so please keep in mind there will be limited resources and support. BR, Seong
• 

  Lenio Cacula

  • over 2 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  CC1100: Inverted layout for RF-N and RF-P and consequences for FCC testing

  • Resolved

  Part Number: CC1100 If by mistake the layout has reversed pins 12 and 13 (RF_P and RF_N) of CC1100
• 

  TER

  • 8 months ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  RE: Compiler/CC1100: CC1101 and CC1310 sensitivity adjustment?

  It's not possible for me to know why you get poor range based on the information given in the post. Have you tested with the settings suggested here: http://dev.ti.com/tirex/content/simplelink_cc13x0_sdk_3_20_00_23/docs/proprietary-rf/proprietary...
• 

  Dmitri Ivanov

  • over 2 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  RE: CC1100: Assistance with selection of a 868MHz RF module

  Excellent, thank you!
• 

  RGW

  • over 1 year ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  RE: CC110L: CC110L 433,92MHz range issues

  Hi Felip, You could change the front-end passives on the CC1100 868/915 MHz EM to the BOM for 433 MHz. If the average noise level is at -90 dBm then this will affect the range distance since this will set the practical sensitivity limit. What is...
• 

  Marie H

  • 9 months ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  RE: CC1101: How to send unmodulated carrier using cc1101

  Hi Lucia, Let me loop in an expert. In the mean while, can you confirm what version of the CC1100 CC1101 CC1100E CC2500 Examples Libraries you are using?
• 

  Robert Eschbach

  • over 2 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  CC1100: replacing CC1100 with CC1101

  • Resolved

  Part Number: CC1100 We are planning to upgrade from the CC1100 radio chip to the CC1101. There has
• 

  TER

  • over 2 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  RE: CC1100: Suggested workaround in errata of CC1100 to read TXBYTES doesn't work in RIOT OS

  Would you be able to only use MSB-IoT Boards? This sounds like a SPI issue more than a chip issue (or potentially a combination). Have you tried to monitor the SPI interface in this loop to see in detail what is going on?
• 

  Kenji3

  • over 1 year ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  RE: How to disable carrier sense in CC1101

  Hi Siri, Thank you for your reply. Please let me ask you one more question. Is this code still able to detect carrier sense even if MSCM1.CCA_MODE is cleared? In fact, I have already confirmed that MSCM1.CCA_MODE is always cleared. However, there are...
• 

  Alvin Chen

  • over 3 years ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  CC1100: CC1100 WOR minRX timeout

  TI Thinks Resolved

  Part Number: CC1100 The WOR cycle is 3S, the minimum is only Rx timeout is 2441ppm*3s 7.3ms. If the current 15.7ma, this power is too large. The host sends data only send 2 bytes (leading) + 2 (synchronous character) +2 (address) + 1 (length) + 2...

Didn't find what you are looking for? Post a new question.

• Ask a new question