Part Number: CC110L Other Parts Discussed in Thread: CC1101 Hello,
I'm still working on optimizing a CC110L receiver application (see this thread ), and there are some unresolved issues and questions.
Summary: I have set up the CC110L to receive Manchester…
Part Number: CC110L Other Parts Discussed in Thread: CC-ANTENNA-DK2 I am implementing the miniature PCB helical antenna (19 mm x 11 mm) as described by reference design SWRA496 for use at 915 MHz.
Design Note DN038 gives an expected target impedance of…
Part Number: CC1200 Other Parts Discussed in Thread: CC110L , CC1000 , , TEST2 , CC1101
Hello,
we have developed a wireless ecosystem composed by a Base Station and Mobile Devices. The Base Station is using the CC110L transceiver, while the Mobile Devices…
Part Number: CC110L Hello,
I would like to receive the full datasheet/ complete footprint drawing of the component CC110L in the QFN-20 package. according to the data sheet, the drawings would be on the product page. I found those documents but they are…
Other Parts Discussed in Thread: CC110L , CC1101 Hello All,
I need your help to understand if we can use the same code on our devices using CC110L or CC1101.
For example if we have one device were we use CC110L and because of shortage of the components…
Part Number: CC110L Hello,
I've built a PCB with a CC110L hooked up to a PIC16F1828 controller via the SPI bus.
However, communication with the CC110L seems to fail, and I haven't found out why that is.
Here is what I do:
Power-up
Wait 1 sec…
Hello,
I was hoping you could provide a more detailed schematic / pinout for the 430BOOST-CC110L booster pack? I found the quick start guide here: https://media.digikey.com/pdf/Data%20Sheets/Texas%20Instruments%20PDFs/AirBoosterPack_QSG.pdf
However this…
Part Number: CC110L Hello,
i'm trying the cc110L transceiver at 434MHz. I've built two pcbs: transmitter and receiver, separately.
In both of them, the spi bus is working at 100KHz and I can write/read registers as chip version, chip status, RSSI…
Part Number: CC1101 Other Parts Discussed in Thread: CC110L , I have a configuration for the CC110L chip which will act as a transmitter of some data in a sensor application.
I have tried to use the same values as register setting for my receiver CC1101…