Part Number: CC1190 Other Parts Discussed in Thread: CC1310 Hi
My customer is developing CC1310+CC1190.
And I found the combo does not supported high speed mode.
In here https://dev.ti.com/tirex/explore/node?node=A__AMIkafnLqF4XiG-e9SM9Zw__com.ti.SIMP…
Part Number: CC1190 Other Parts Discussed in Thread: WI-SUN , Hello,
We intend to integrate the CC1190 RF front end or a similar amplifier with the CC13xx series microcontrollers utilizing the Wi-SUN SDK. Could you offer guidance or sample code on interfacing…
Hi,
The kit costs only $32 and will allow you to test on a known good hardware with known good software. If the problem exists then, we will have the option to debug your question furthermore.
Your CC1190 schematic is not complete and would expect that…
Part Number: CC1190 Other Parts Discussed in Thread: CC1312R7 I am using a CC1190 with a CC1312R7 and am wondering if an RF shield will be required for RF compliance reasons. I see the TI devboards have a shield. If it is not required is there any documentation…
Part Number: CC1190 Other Parts Discussed in Thread: CC1312R Hi,
My customer is using the CC1312R and the CC1190 combination.
The frequency he uses range is from 920.9MHz to 923.3MHz.
He wants to output up to 200mW within this range.
I have a schematic…
Part Number: CC1310 Other Parts Discussed in Thread: CC1190 , LAUNCHXL-CC13-90 , , CC1350 Section 11.3.3 of the CC13x0 Technical Reference Manual - "Control External LNA/PA (Range Extender) With I/Os" - describes calling IOCPortConfigureSet() in…
Part Number: CC1190 Other Parts Discussed in Thread: CC1310 Hello,
I understand that LAUNCHPAD_CC1310_CC1190_1_3_0(Evaluation Board) is optimized for 915MHz operation,
So, after testing your Evaluatin board , RF performace of 940MHz band seems to be poor…
Part Number: CC1190 Hello, In our project, we are planning to add the power amplifier CC1190 to SX1268 module. SX1268 can output maximum of +20dBm. With +10dB gain setting on the CC1190, I feel we should be able to achieve +30dBm. Please let me know the…