Part Number: CD4024B Tool/software: Hi Expert,
ny customer want to use the CD4024 counter IC for line application testing. CH1: CD4024_Pin12_Q1 CH2: PSU Protection signal CH3: PSU 12V output CH4: CD4024_Pin1_Input CD4024_Pin2_Reset is currently directly connected…
Part Number: CD4024B Hello,
Need your help guys. Our customer is looking for the ESD Level of CD4024BM96. Appreciate your support on this. CD4024BM96: http://www.ti.com/product/CD4024B
Art
When powering up, the contents of the flip-flops are unspecified; see [FAQ] What is the default output of a latched device? (Flip-Flop, latch, register) So the output frequency could be between 125 kHz and 500 kHz.
To divide a clock signal down, use a…
Part Number: CD4024B We are looking to replace the CD4024BF (14-pin ceramic) with the CD4024BE (14-Pin Plastic) due to availability.
Is the plastic part CD4024BE a drop-in replacement - Same Dimensions?
Does the plastic part CD4024BE have the same environmental…
Part Number: CD4024B I am needing to correctly use the IC to divide an input wave from a signal generator by 32 and by 8 (any number really I know that it divides by 2,4,8,16,32,64 I think) I am assuming it shouldn't matter whether the input wave is…
Thank you for your reply, makes sense - but then why at least 4 different weights for the same die, assuming the automotive and commercial ones are the same die ?
Long time ago now I was involved in some custom hybrids - miss how data sheets used to include…
Other Parts Discussed in Thread: NE555 , CD4013B , NE556 , CD4024B Hello experts,
My customer is looking for alternative device for AN6780 (panasonic)
If TI have, could you tell me alternative device?
Thanks and best regards,
Ryo Akashi
Other Parts Discussed in Thread: LMC555 , NE555 , LM555 , NA555 , TLC551 , SE555 , TLC552 , TLC555 , SA555 , CD4060B , CD4024B , CD4040B , CD4020B What is the difference between the part numbers?
How is the output frequency and duty cycle set?
Why is the actual frequency…
Christopher,
Pin 3 can drive low and high without an RL resistor. See the data sheet VOL and VOH specifications.
For multi turn potentiometer tuning, put pot in series with RB; You could make the POT 1M ohms and RB 422k. This will allow a wide range of…