Part Number: CDCEL913-Q1 Other Parts Discussed in Thread: CDCEL913 Hi TI,
CDCEL913 s upports n onvolatile EEPROM programming, but i can not find how to modify default EEPROM configuration. Could you help give some advice?
eg: I want to set default…
Part Number: CDCEL913-Q1 Hi team
The crystal matching test result of CDCEL913-Q1 does not meet the customer requirements while customer could adjust the internal capacitance value of CDCEL913-Q and then meet the matching test, the test details we do…
Part Number: CDCEL913-Q1 Other Parts Discussed in Thread: CDCE913-Q1 , CDCE6214-Q1 , CDCEL937-Q1 , CDCS503-Q1 Hi
The operational temperature range of CDCEL913-Q1 is only -40~85 while CDCE913-Q1 is -40~125, could you please tell me why? Any alternative…
Part Number: DS90UB941AS-Q1 Other Parts Discussed in Thread: CDCEL913 , CDCEL913-Q1 Hi Expert,
Our customer use 941 in their project. Now they use cdcel913 to generate clock for 941. But at the same time, DSI clock is also applied. 941 is configurated…
Hello Kurumi,
Please note the subtle detail between the CDCE913-Q1 (3.3V/2.5V) and CDCEL913-Q1 (1.8V).
CDCE913-Q1 is AEC-Q100 Qualified at 'Grade 1' (-40C to +125C) and the CDCEL913-Q1 is AEC-Q100 Qualified at 'Grade 3' (-40 to +85C).
Only CDCE913…
Hi David,
Take a look at CDCE913-Q1 or CDCEL913-Q1. These devices are automotive grade and have a wide temperature range of operation (-40C to 125C). The minimum VCO frequency is 80 MHz. There is a 10-bit output divider so the min output frequency is…
Part Number: SN65DSI83-Q1 Other Parts Discussed in Thread: CDCEL913 , , SN65DSI83 Tool/software: Hi,
I am writing to get your advise on REF_CLK related to this thread https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1323005/sn65dsi83…
Hi David,
I have shared data sheet of display panel and Schematics.
And By enabling DSI83-Q1 internal test pattern , Display is completely blank.
What might be the reason for getting blank?
Note:
The generated frequency from the reference…
