Answered

• CDCLVD1213: high speed cable assembly for LVDS clock output

  

  Mohsin Shehzad

  Resolved

  Part Number: CDCLVD1213 Other Parts Discussed in Thread: DS90LV804 , Tool/software: Hi, We want to interface between FPGAs for LVDS data and clock on two separate PCBs using a high speed cable assembly like https://www.digikey.co.uk/en/products/detail/i…

  • Resolved

  • 11 months ago
  • Clock & timing
  • Clock & timing forum
Answered

• CDCLVD1213: Vt connection for DC-coupled LVDS input clock

  

  Ryan Crowell

  Resolved

  Part Number: CDCLVD1213 Hi there, The CDCLVD1213 datasheet doesn't explicitly say what to do with the Vt input when the clock source is DC-coupled to the chip. Should it be left open? Should it be bypassed to ground with a capacitor? Or something…

  • Resolved

  • over 4 years ago
  • Clock & timing
  • Clock & timing forum
Answered

• CDCLVD1213: Can CDCLVD1213 support LVCOMS in?

  

  Jeff Xie

  Resolved

  Part Number: CDCLVD1213 Hi team, Customer want LVCMOS in LVDS out translator. Can CDCLVD1213 support this? In the datasheet it says "The input can either be LVDS, LVPECL, or CML". If not, please suggest one device, thanks.

  • Resolved

  • over 5 years ago
  • Clock & timing
  • Clock & timing forum
Answered

• CDCLVD1213: maximum skew in a single device?

  

  Bruce li

  Resolved

  Part Number: CDCLVD1213 Dear TI Experts, As we can see in datasheet, Output skew is 20ps, maximum of Part-to-part skew is 600ps. Could you kindly tell me what is CDCLVD1213’s maximum skew out of all channel in single device under worst cases? Is it 20ps…

  • Resolved

  • over 6 years ago
  • Clock & timing
  • Clock & timing forum

• CDCLVD1213 EVM

  

  1886332

  Hi, Why is R5,R6 and R7 are NP in the board? It is not mandatory for offeset of 1.5V? thanks,

  • over 12 years ago
  • Clock & timing
  • Clock & timing forum

• LMX2594: LMX2594 biasing circuit

  

  Carlo

  TI Thinks Resolved

  Part Number: LMX2594 Other Parts Discussed in Thread: CDCLVD1213 , LMK00304 , CDCLVD1204 , CDCLVP1204 Hi team, Good day. Our customer is using the LMX2594, and the RFOUTB pins output the clock to the IN pins of a CDCLVD1213. Is adding a biasing circuit …

  • over 4 years ago
  • Clock & timing
  • Clock & timing forum

• LMX2594: What is the common mode output voltage for the LMX2594?

  

  Trevor Fox

  TI Thinks Resolved

  Part Number: LMX2594 Other Parts Discussed in Thread: CDCLVD1213 , CDCLVP1204 Hi I need to split the SYSREF (RFOUTB) output of the LMX2594 so that I can drive two parts with it. My choices are an LVDS splitter, such as the CDCLVD1213, or the LVPECL splitter…

  • over 4 years ago
  • Clock & timing
  • Clock & timing forum

• RE: SN65LVDS104: Low Jitter Alternative

  

  David (ASIC) Liu

  Zach Would CDCLVD1213 meet your requirement: http://www.ti.com/lit/ds/symlink/cdclvd1213.pdf ? Thanks David

  • over 5 years ago
  • Interface
  • Interface forum
Answered

• RE: CDCLVD1204: Power Dissipation calculation and Tj max

  

  Bob Kriner

  Resolved

  I'm following Steve's question above (he's our FAE). I found CDCLVD1213 also suggests it can be used with 105C TPWB . However, the CDCLVD1213 thermal calculations make better sense. For example, they cite the 85mA max supply current listed earlier…

  • over 6 years ago
  • Clock & timing
  • Clock & timing forum
Answered

• ADS4222: which clock buffer to work with?

  

  [FAE] Andrew Wang

  Resolved

  Part Number: ADS4222 Other Parts Discussed in Thread: CDCLVD2102 , CDCLVD1213 , CDCLVD1204 Hi Team, From our ADS4222 datasheet, Customer is looking for a clock buffer to work with it. They will operate this device at highest sampling rate. I have 3 quick…

  • Resolved

  • over 7 years ago
  • Data converters
  • Data converters forum

Didn't find what you are looking for? Post a new question.