Part Number: CSD19534Q5A in figure 10 of the datasheet (page 6) it shows the SOA of the FET. In the screenshot of the image i have a red dot the represents my operating point. I read that as operating outside of the safe operating area, is that correct…
Part Number: CSD19534Q5A Other Parts Discussed in Thread: CSD19532Q5B , SYNC-BUCK-FET-LOSS-CALC , CSD19531Q5A , CSD19533Q5A Hi team, I got a question from customer, In the process of efficiency optimization of buck power supply, the following questions are…
Part Number: CSD19534Q5A Other Parts Discussed in Thread: NONSYNC-BOOST-FET-LOSS-CALC , , LM5156H Hi,
You have this very useful tool that help us calculate MOSFET power loss on a boost design, namely NONSYNC-BOOST-FET-LOSS-CALC.
However, there are many…
Part Number: CSD19534Q5A Question: I am using CSD19534Q5A MOSFET for the power supply section of automotive electronics. Can I get the confirmation from the TI that the Fit rates and MTBF data (1.7PPM and 603 Million operational hours @ 125°C) associated…
Part Number: CSD19534Q5A Hi all,
during a series of measurements using double pulse test on CSD19534Q5A (using Si8271 driver) with an clamped inductive load, I have noticed that by a specific current/voltage value, namely 10 V/10 A and also 15 V/10 A…
Part Number: CSD19534Q5A Dear *,
in the DS there a re 2 values for PD 3.2W and 63W can you explain the difference?
If the package is mounted on PCB then it can dissipate 3.2W , and if we add passive cooling then it can dissipate up to 63W ?
Best Regards…
Part Number: CSD19534Q5A Hi team,
Please kindly advise the below.
- Why is between 5 and 8 pin placed not only bottom but also lateral ?
- Is solider fillet mandatory ? There is no problem if the bottom side is mounted ?
- If solider fillet is mandatory…
Part Number: CSD19534Q5A Other Parts Discussed in Thread: TINA-TI , Dear *,
on web page http://www.ti.com/product/CSD19534Q5A/toolssoftware there are two models PSpice and TINA-TI.
1) Can you tell are the both models the same but in different format or…
Part Number: CSD19534Q5A Hi
I got a questionabout CSD19534Q5A from my customer. They will mount heatsink on this devise and be screwed shut it on the board. How much pressure can I apply it?
Best regards,
Yokota