Search tips
Showing 10 results View by: Thread Post Sort by

  • DAC38RF86: Maximum achievable data rate

    TI Thinks Resolved
    Part Number: DAC38RF86 Hi All, I am using DAC38RF86EVM in conjunction with TSW14j56 Rev E as a signal generator to generate a custom pattern. (The custom pattern are square pulses with 5 samples per square pulse) I am able to generate a 100 MHz sinusoidal…
    • Answered

  • DAC38RF86: Unable to generate sinusoidal wave using onboard clock VCXO

    Resolved
    Part Number: DAC38RF86 Other Parts Discussed in Thread: DAC38RF82EVM , DAC38RF82 , Hi All, I am using DAC38RF86EVM in conjunction with TSW14j56 Rev E as a signal generator to generate a custom pattern. To test this I am trying to generate a 100 MHz sinusoidal…
    • Resolved

  • RE: DAC38RF86: DAC38RF8x GUI and DAC38RF86 Configuration and Finding DAC38RF8x EVMV2.0

    Hi Cherry, I cannot make any recommendations on how to fix the display issue. This is a windows related issue and not related to our gui as it has been proven to work on many PCs. Cherry Zhou said: 2. The example as shown. They set LMFSHD=44210，2IQ，16…

  • DAC38RF86: JESD SYNC error (red light) on DAC38RF86EVM

    Part Number: DAC38RF86 Hi All, I am working with DAC38RF86EVM connected with TSW1456 Rev E where DAC is being used for waveform generation. After completing setup using the instructions from documentation ( https://www.ti.com/lit/ug/slau671a/slau671a.pdf…

  • DAC38RF86: Documentation for On-Board VCXO Clock Mode (CMODE4) on DAC38RF86EVM

    TI Thinks Resolved
    Part Number: DAC38RF86 Hi All, I am working with DAC38RF86EVM connected with TSW1456 Rev E where DAC is being used for waveform generation. I wanted to use DAC without supplying with an external clock to it, thus using the On-Board VCXO Clock Mode (CMODE4…

  • RE: DAC38RF86: DAC38RF86

    Thanks Mark, that's good to hear. We'll go ahead and close this thread in that case. Again, apologies for it being 'lost'. ~Leonard

  • DAC38RF86: DAC38RF86EVM

    Part Number: DAC38RF86 Hi, We want to evaluate some of your high speed DAC (like DAC38RF86) to be used in our ATE systems. Can we connect us to some of your local FAE, so we can discuss our challenges and select the best TI product for our ATE setup? …
    • Answered

  • DAC38RF86: Complex Modulated Carriers

    Resolved
    Part Number: DAC38RF86 Other Parts Discussed in Thread: DAC38RF89 Hi, I'd like to generate four complex modulated carriers: Two at 875 MHz (each 250 MHz Bandwidth) Two at 1125 MHz (each 250 MHz bandwidth) Is this feasible? If so, I need to know…
    • Resolved

  • DAC38RF86EVM: can work with TSW14J56EVM/TSW14J57EVM?

    TI Thinks Resolved
    Part Number: DAC38RF86EVM The DAC38RF86 evaluation module (EVM) is designed to work with the TSW14J56EVM (Rev B and up). 1. What does (Rev B and up) mean for？ 2. Can DAC38RF86EVM work together with TSW14J57EVM ？
    • Answered

  • RE: DAC38RF89EVM: Only one Interpolation setting in the quick start

    Resolved
    Hi Jonathan, This is an error in the GUI. It should be possible to select 16x interpolation for the mode you are trying to use. Can you replace the following file with the one attached: modes_n_clock_programming.tx t The file can be found in C:\Program…

Didn't find what you are looking for? Post a new question.