Part Number: DAC61404
Tool/software:
AVDD = +12V, AVSS = -5V, DVDD = +5V, IOVDD = +3.3V
Question:
1) if output short to +20V, can this device protected? (+20V is higher than AVDD, but lower than 40V limit)
2) If I need to set output = 0V to…
Part Number: DAC61404
Tool/software:
Hello,
1) for AVDD and AVSS setting, if target vout is 0~5V, can it be set AVDD = 5V, AVSS = GND; but I observed the headroom and footroom in datasheet, I am not sure if need bipolar power supply for it.
2…
Part Number: DAC61404 I asked the question earlier if unequal voltages could be utilized when using the sense lines and was told it would be fine. We are seeing the devices latch up. When there is an offset on the sense lines I am seeing the device latch…
Part Number: DAC61404 Other Parts Discussed in Thread: DAC81404 , DAC81402 , DAC61402 Hi Experts,
Seeking your assistance on this query from Cx about DAC61404 device ID.
I'm currently working with the DAC61404 to create a threshold voltage for a comparator…
Part Number: DAC61404 I would like to run the DAC in the 0-40V mode using up to 30V output. I also need to support compensation for the negative sense line to -2V with respect to the GNDs. Since the bipolar setup is only to +20Vout, I would like to run…
Part Number: DAC61404 I can read/write the SPICONFIG register (and read-back to confirm), but whenever I write to the DACPWDWN register it only ever reads back as 0xFFFF. According to the datasheet the lower 4 bits are R/W. Specifically, I am trying to…
Part Number: DAC81404 Hello?
As title, I want to know for high current driving application.(using limit 200 mA Max.)
But I can't find a information of parts(R, C, TR, etc.) in application.
Please reply.
Part Number: DAC61408 Other Parts Discussed in Thread: DAC61404 , DAC81408 Tool/software: We are looking at replacing a older parallel DAC with the DAC61408. The older DAC has separate power pins for analog ground and digital ground and the existing design…
Part Number: DAC63204 Other Parts Discussed in Thread: DAC61404 Hi ,
For my design im looking for 12V, with capable of 1MHZ Transient response DAC.
if any alternate part available kindly suggest me.
Thanks & Regards,
R SRI RAJA SUMAN.
