Part Number: DAC70501 Hi,
I intend powering the DAC70501 DAC with VDD=5V +/-5%, but want to use the internal 2.5V reference in a VREFx2 configuration. This means the theoretical VREFx2 may exceed VDD.
Assuming i will avoid writing the codes beyond…
Part Number: DAC70501 I had the same issue as the one on this thread.
https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/994874/faq-dac80501-why-is-the-output-not-updating
And I did notice the REF-ALARM flag on…
Part Number: DAC70501 Other Parts Discussed in Thread: DAC60501
Tool/software:
Hi,
I try to set up my DAC60501 with SPI, SPI2C Pin is connected to GND and I can see the SPI signals on the pins of the DAC. VDD is at 3v3 and connected to VREFIO. …
Part Number: DAC70501 Other Parts Discussed in Thread: DAC80501 , DAC60501 Tool/software: Hello!
I am using DAC70501MDGSR and I am trying to set-up registers by writing into them via SPI protocol (1 MHz clock).
I am using internal reference (VREFIO…
Part Number: DAC70501 Hi all,
I have a similar problem. In my case, I'm using the internal reference and VDD is 3V3. The REF-ALARM bit is set as soon as power is applied. There are 4 combinations of REF-DIV and BUFF-GAIN and the alarm condition is triggered…
Part Number: ADS7056 Other Parts Discussed in Thread: DAC70501 Hi TI, I'm looking for Linux drivers for these ADC and DAC ADS7056 and DAC70501. I don't plan to use up to 2.5 Mps.
I need it for the test on Raspberry Pi. I can set 33MHz for SPI. :)
…
Part Number: DAC70501 Hi,
In the datasheet, the DAC data register description DAC70501: DATA;13:0],0,0
Does this means needs to add two '0' at LSB before the actual 14 bit data ?.
Regards,
Harris
Part Number: DAC70501 Other Parts Discussed in Thread: DAC8311 , , DAC81402 , DAC70004 Hello Team
We are looking for the DA converter which have similart spcifications to DAC70501M except that the reference mode after POR is external reference mode…
Part Number: DAC70501 Other Parts Discussed in Thread: DAC8560 Dear Specialists,
My customer is considering DAC70501 for +/-10V output.
They're thinking about using SLAU525 reference design.
The voltage reference of DAC8560 and DAC70501 are slightly…
