Part Number: DAC8830 Tool/software: Hi TI expert
I am designing a PCB using the DAC8830. How should AGND and DGND be handled?
1. Prepare separate GND planes. 2. Connect using a GND plane. (A completely common ground)
What are the guidelines for…
Part Number: DAC8830DAC8830ICDRG4 used in P12 project. Voltage reference nominal value (REF) is 5.006V, and it is higher than VDD (5V).
Is there is possible a slight excess of REF relative to VDD is allowed; if yes – what is the maximum allowable excess…
Part Number: DAC8830 Tool/software: Hi Team,
DAC8830ICDRG4 used in our project. Voltage reference nominal value (REF) is 5.006V, and it is higher than VDD (5V).
Is there is possible a slight excess of REF relative to VDD is allowed; if yes – what…
Part Number: DAC8830 Other Parts Discussed in Thread: DAC8831 Hi,
a account wants to get DAC8830 TINA model to do some noise simulation with TI TINA, but only IBIS model is found in website.
can you help provide TINA model of DAC8830?
Part Number: DAC8830 Other Parts Discussed in Thread: TIDA-01504 "I need help with the grounding connection of the DAC8830, as when connecting it to a microcontroller, I experience voltage drops in VREF and CS. Additionally, Vout shows no variation. I…
Part Number: DAC8830-EP Tool/software: Hi there,
on the DAC8830-EP datasheet SGLS334C (revised 2007) on page 7 the VDD pin is listed as 'Analog power'. By looking at the device architecture, electrical characteristics and I/O plots it seems Vdd is the…
Part Number: DAC8830 Tool/software: Hi TI,
I am considering using the DAC without an output buffer. From page 17 of the datasheet: "These DACs are capable of driving unbuffered loads of 60 kΩ". I assume all electrical characteristics are met for loads…
Part Number: DAC8830 Other Parts Discussed in Thread: OPA388 Tool/software: I have chosen the DAC8830 to realize the output of analog signals ranging from 200Hz to 48kHz. The sampling rate is 153.6kHz. The circuit is designed according to the circuit…
