Hi Sebastien,
I know it's been a while, we did not forget about this! I've been working for the past few weeks to try to get this system working. I think I have audio coming through now, but I have been having trouble getting our digital audio test equipment…
Hi, Ijas
Glad you like the new version of TIDA-00779.
Yes, we made some updates to fix those known issues. default gate driver is UCC27524 for its high drive current, however, UCC27531 can also be fine to be used on the board.
Sorry about those wrong…
Hello Prathmesh,
The closest alternative to REG104FA-5/500G3 is TL1963AKTTR, which is offered in TO-263 (KTT) package.
For REG103GA-3.3, the best alternative is TPS7A2633DRVR which is not on the same package, but similar specs. Another option is TLV76133DCYR…
Hi Sankalp,
I would recommend 2 pcs TPS62932 to get Input Vin 15V, output 3.3V(1A) and 5V(0.5A). It is 3.8-30V input, 2-A, 200kHz to 2.2MHz, low-IQ synchronous buck converter in SOT-583 package.
Thanks and kindly let us know anything unclear.
BRs
Luci…
Hi, yes the uniflash setup is the same for both projects. Just to note I've switched to flashing the projects using the built in functionality of CCS as appose to uniflash, but I'm pretty sure this makes no difference. Here is the log output with…
Hello Jianzhong,
According to your reply, I have made the following attempts:
1.Modified the device tree according to K3-FPDlink-IMX390-RCM-0-x.ditso.But the image I captured is still the same as yesterday.
The relevant dts files are as follows.Could…
Other Parts Discussed in Thread: OPA656 Hello together,
i build a transimpedance amplifier for a sensor. Under point five I read in the description of the demoboard that when I use a high impedance sensor I have to place a 100 Ohm resistor on the probe…
Hi Ranjith,
Thank you for providing that information. We have TLV75201PDSQR as an adjustable dual LDO which each rail can handle up to 1A , and each rail is independently set. This dual LDO is adjustable with high PSRR and comes in a small package:
…
Hello Nikhil
In a single test program for one process, the only "1b, 3" process is working normally, so I want to first verify it through the "1b -> 2 -> 3" test program
1. When you use 1a -> 2 -> 3, this works fine right?…
