Hello Lori,
Yes, I also don't think the communication error could cause the flicker issue.
The steps are like this, after power on, the DLP4710LC projector display splash image. Then clicked the button 'Run Once', the projector dispaly the internal…
Hello Shinji,
Are you still having this issue? I will go ahead and close this thread for now, please respond to it if you have an update.
Best,
Maximus
Part Number: DLP4710LC Hello, TI engineer !
I learnt from the article DMD Optical Efficiency for Visible Wavelengths that the 5.4 µm Pitch DMD diffracted spot should be as shown below.
However, the actual diffracted spot measured by me is shifted…
Part Number: DLP4710LC Hi,
In my current design i am using DMD IC through a connector
can i solder it on PCB ? can DMD chips be passed in to reflow machines for soldering ?
If so kindly share the soldering profile of the DMD IC DLP4710LC
Thanks
Andy,
The different modes rely on different hardware signals. For example, light control mode is driven by and drives trigger signals that do not apply to display mode. This signal may not be the issue but serves as an example.
I suspect a hardware issue…
Part Number: DLP4710LC Other Parts Discussed in Thread: DLP4710EVM-LC ,
We bought one DLP4710EVM-LC and several DLP4710LC chips and found that the chips were often damaged during use.
We developed a new projector with the PCB of DLP4710EVM-LC. In the process…
Part Number: DLP4710LC Other Parts Discussed in Thread: DLP4710 , DLP3010 Hello everyone,
Is there any ESD protection measures to DLP projectors?
Because the projector could be crashed or stop displaying when touch the optical machine with hands, whether…