Part Number: DLPC3438 Other Parts Discussed in Thread: DLPA3000 , Hi, Sir
Currently, we want to know how to defined factory tests, for DLPC3438+DLPA3000.
Which signal need to be test in factory?
Thanks
zhang
Part Number: DLPC3438 Other Parts Discussed in Thread: DLP3010 , , DLPA3000 , DLPDLCR3010EVM-G2 I have got a PCB where I want to use a DLPC3438 with an DLPA3000 and a DLP3010. The HOST_IRQ does not go low.
The firmware I use is from the DLPDLCR3010EVM-G2…
Part Number: DLPC3438 Hi, sir
I found HOST_IRQ is connect to MCU in TI reference design, and it's must be have or just for working status of DLPC3438?
Can I disconnect it from MCU?
Thanks
Br
Zhang Tao
Part Number: DLPC3433 Other Parts Discussed in Thread: DLPC3438 I am comparing with the DLPC3433 vs DLPC3438. Both share the same datasheet. The 3433 is a smaller package and has DSI/LVDS, where it appears that the 3438 does not.
We are considering changing…
Part Number: DLPC3438 Hi, there
I'm going over autofocus.
I have searched several site and documents, it seems that I have to have an external device for supporting autofocus.
but I don't know it is sure. So can you let me know about below questions…
Part Number: DLPC3438 Other Parts Discussed in Thread: DLPA3005 , HI.
Application : Dental Oral Scanner.
we hope to use DLPA3005 + DLPC3438. because DLPA3005 can control LED current 12A.
is it possible design? or impossible? I want to know if this design…
Part Number: DLPA2000 Other Parts Discussed in Thread: DLPC3435 , DLPC3430 , DLPC3433 , DLPC3432 , DLPC3438
Hi,
When measuring power consumption, I put a current probe on the green VLED line.(LED red/blue are turned off)
This is what I get:
What is the…
Part Number: DLPC3438 Other Parts Discussed in Thread: DLP3010 , DLPA3000 , DLPDLCR3010EVM-G2 Hi, Sir
I want to build a firmware by myself, DLPC3438+DMD. and I don't know how to do. could you send me a guide?
thanks
Part Number: DLPC3438 Other Parts Discussed in Thread: DLPA3000 Hi, Sir
Currently, the physical size of L is too big, and I want to change it to small one. so I want to know how to calculate the value of L for PWR1/2 of PAD3000. btw, can I use 4.7uh L…
Hi, Azad
Currently, I tried to use GUI to connect the DPLC3438 by Cyusbs236 DVK board. I connected SBC0 to I2C port of DLPC3438, but I got an error message. I attached the error message and my DVK board setting. could you help to checked it and give me…