Below are the two reference PCB designs we have for DRV10983. PCB files can be downloaded from the "Design files" section.
Part Number: DRV10983EVM-TB Other Parts Discussed in Thread: DRV10983 , MSP430G2533 , MSP430G2553 , USB2ANY Tool/software: Code Composer Studio I am new to this field and am learning to use the Target board and Launchpad to program DRV 10983. I have a motor…
Other Parts Discussed in Thread: DRV10975 , DRV10983EVM-TB , MSP430G2553 , DRV10983 Hello,
I'm trying to use an MSP-EXP430G2 Launchpad and DRV10983EVM-TB target board to program a DRV10975 chip. I opened the programming tool, sloc316, in CCS Version: 6.1…
Is the customer interfacing their board with our DRV10983EVM & GUI? If so, can we confirm how they are doing it (wiring, process, etc)?
Have they looked at the DRV10983 gang programmer for strategies?
DRV10983EVM-TB can be used to write…
Please refer to this post for answer to the differences of power ratings. Specifically, the power rating should depend on your application and intended motor specifications. Both devices can operate within the bounds of voltage and current…
Part Number: DRV10983 Other Parts Discussed in Thread: , MSP430G2553 Hello,
Regarding to the supply voltage register(Reg:0x1A) on DRV10983 ,my customer is asking some question.
(1) This register is supported only during motor operation.
MCU can be used to change the register setting and access EEPROM, the motor is operated by DRV10983 and please refer to datasheet and tuning guide for DRV10983 to configure device.
Example Source code for accessing register can be found in…
Customer might have to configure most of register setting based on motor, so not only this bit, other settings will also change.
There is production tool available for customer to program device prior to assembly.
The Python scripting feature is available for registers defined in the register map only. All the python write and read operations are internally going through the register map. If the address passed in the python function is not available in…