Part Number: DRV5056-Q1 Hi,
I'm developing a position detection system to control the position of a shaft as it slides past the hall sensor (see my picture below).
Due to space constraints, the magnet is fitted to the shaft.
The air gap between the…
Part Number: DRV5056-Q1 I'm using a DRV5056A3-Q1 sensor in an application where the supply voltage Vcc=3.3V. I use a magnet with Br=1.26 diameter d=5mm and thickness s=1mm. The initial distance between the sensor and the magnet is 3.29 mm. The body on…
Part Number: DRV5056-Q1 Other Parts Discussed in Thread: DRV5056 , DRV5032
Hi, I want to understand supply current value. The sensor is typically taking ~6mA current at ambient temperature.
With change in temperature the supply current follows this curve…
Part Number: DRV5056-Q1 Hi,
The TI tool takes into consideration d1 distance from the surface of the sensor IC for sensing of distance measurement.
Whereas, the sensing element is placed at 0.47mm inside the IC from the surface.
Do we need to take into…
Part Number: DRV5056-Q1 Other Parts Discussed in Thread: DRV5056 Hi team,
I have two questions would like to check with you.
1. Referring to below formula, the Vout in equation 1 stands for the device's output, correct? Or we should use this equation…
Part Number: DRV5056-Q1 Hi team,
My customer wants to minimize voltage noise. Are there any other effective measures besides the bypass capacitor and RC filter in the block diagram?
Regards,
Part Number: DRV5056-Q1 Other Parts Discussed in Thread: DRV5056 Hi, I would like to know will the sensor transmit constant output while the magnet is rotating at d1 and d2 distance? (as shown in below figure) Will there be any added error in output voltage…
Part Number: DRV5056-Q1 Other Parts Discussed in Thread: TMAG5170 , DRV5056 , DRV5055
Hi,
I am looking for optimal option for magnet dimensions and material( N35/N38 ) for below criteria.
I have concern as the distance increases, the resolution is decreasing…
