Part Number: DRV8816 Other Parts Discussed in Thread: , DRV8872 Hello,
I am using the DRV8816 Motor Driver to control a 24V Brushed DC Motor (inside of a linear actuator). I am noticing issues with low side not being pulled low all the time.
In the first…
Part Number: DRV8816 Hi, Can you confirm, as stated in this thread https://e2e.ti.com/support/applications/motor_drivers/f/38/t/640512?tisearch=e2e-sitesearch&keymatch=DRV8872
Part Number: DRV8210 Other Parts Discussed in Thread: DRV8816 Hey team,
Somewhat amusing question - what part would you recommend in our portfolio that is functionally similar to the DRV8210, but is in a larger package like SOT-23 or something similar…
Part Number: DRV8816 Other Parts Discussed in Thread: DRV8703-Q1 , DRV8704 , DRV8702-Q1 , DRV8800 , DRV104 , DRV103 , DRV8871 , DRV8870 , DRV8872 Hi,
There are two half-bridge in DRV8816 chip, I want to tie the EN1 and EN2 together (also tie IN1 and IN2, OUT1…
Part Number: DRV8816 Hi there,
I'm considering using this component to drive two (different) solenoids, and i have a few questions:
1. Is the max current stated in the d.s is for each of the outputs (2.8A per 1/2 h bridge) or both of them?
2. i havn…
Other Parts Discussed in Thread: DRV8816 , DRV8871 , DRV8870 , DRV8872 I am considering switching to your DRV8816 h-bridge device and I want to verify that they will comfortably (cooly) handle 1A continuous.The specs are 2.8 Peak and 2 RMS. Do you consider…
Other Parts Discussed in Thread: DRV8816 Hi all,
at the moment we use a discrete H-bridge made of some transistors and power MOSFETs to drive a series resonance circuit built by an inductor and a capacitor at 12V/40kHz. Peak current is 1.2A, RMS current…
Other Parts Discussed in Thread: DRV8816 Our customer trying to check protection circuit.
1. They are forcing OUT1 to HSON and OUT2 to LSON.
2. Connecting OUT1 to OUT2 via register(Volume) to control current.
3. Rsense connected to GND, no ITrip.
At IOUT=1.4A…
Could you please let us know RDSON value for charge transistor of charge pump?
Our customer wants to know how much is the current expected when flying cap gets short condition in accidentally.