Part Number: DRV8830EVM Other Parts Discussed in Thread: DRV8830 Hi,
For low power operation, the DRV8830 datasheet recommends removing power from the FAULTn pullup resistor to eliminate a current path from the FAULTn pin through an ESD protection diode…
Hey Manuel,
Did you take a look at the recent DRV8215 ? It has a much lower supported sleep current of 0.01uA, higher current and voltage capability, all for cheaper than the DRV8830. Just don't use the advanced features like speed regulation.
I'm…
Hi Park,
Just to understand your application. Have you connected the DRV8830EVM via I2C to the DevPack Connector of the SensorTag?
I read the DRV8830EVM user guide and there are 9 different addresses the device can take, based on the position of…
Hey Allan,
I'm not sure what you mean - the DRV8830 is just the motor driver and it won't matter what OS your controller is using to run it. You will have to follow your own guide for setting up SPI communication with SDA and SCL lines for it, that…
Hi Park,
Thank you for supplying pictures of your motor setup.
Do you have a solid ground connection between the DRV8830EVM GND and the CC2650STK board GND? Without that the I2C signals will not be read properly by the DRV8830.
Ensure the driver…
