Hi Christopher,
Christopher Buckley said: I am interested in using this for a robotics platform that will have an inverted pendulum task (2-wheeled balancer) and worried about any added delay. How much delay are we talking here? Microseconds? Milliseconds…
Part Number: DRV8832-Q1 Other Parts Discussed in Thread: DRV8838 , DRV8837 Hi,
I am working with the DRV8832-Q1 H-Bridge IC. In the datasheet, there is no information regarding the delay time (between the input and the output signals). There is only…
Part Number: DRV8832-Q1 Other Parts Discussed in Thread: DRV8832 , TPS5401
Hi, Customer wants to know the DRV8832-Q1 footprint and land pattern dimensions. However, they are not mentioned in the data sheet. Could you tell me the dimensions of the land…
Part Number: DRV8832-Q1 Hello,
I am using the DRV8832-Q1 as a Dual H Bridge, and I am trying to disable the PWM getting 100% Duty Cycle.
My settings are as follow:
VCC 4V
ISENSE=GND
OUT1 - OUT2 Via 100Ohm for testing
IN2= 0
IN1 = 3ms pulses…
Part Number: DRV8832-Q1 Hello,
We are currently running the DRV8832-Q1 at 100% Duty Cycle.
We would like to look at running it at a PWM frequency above the audible range (25-30kHz)
The datasheet states a 12ms ramp time when IN1 or IN2 is pulled…
Part Number: DRV8832-Q1 Hi Team,
My customer asked following questions about DRV8832-Q1 Datasheet.
(1)OCP time
In 7.3.6.1, datasheet says “If this analog current limit persist for longer than the OCP time, …” but it seems no description for OCP…
Part Number: DRV8838 Other Parts Discussed in Thread: DRV8871-Q1 , DRV8872-Q1 , , DRV8801A-Q1 , DRV8832-Q1 Tool/software: Hi,
Are there any automotive alternates for DRV8838DSGR? (Preferably pin to pin compatible)
Thanks,
Jagan
Part Number: DRV8832 Hi Team,
Can you please help us regarding the customer's inquiry below.
As described in datasheet, the internal PWM Frequency is 44.5 kHz. How stable should this frequency be and what is the expected tolerance-range? We drive…
Part Number: DRV8839 Other Parts Discussed in Thread: DRV8832-Q1 Hello team.
My customer needs a H-bridge or half-bridge driver which VM can support VM 1.2V-1.5V (OUT is about 1.2V-1.5V).
I found DRV8839 can support this like below, but it is not…
Part Number: DRV8833 Other Parts Discussed in Thread: DRV8832-Q1 Dears,
I was looking for the MTBF for the DRV8832-Q1 when I saw there is data for a part named DRV8833QPWPRQ1
Is this part going to be released soon, is it a custom qualified part for…
