Part Number: DS15MB200 I want use ds15mb200 mux the xilinx artix-7 FPGA gtp(1000Mbps) and lvds_25(100Mbps) signals.
Attached are Schematic .
Really appreciate if you can have a review on this. Thanks.
SFP differential signals spec as blew
FPGA…
Hi Luke,
This is one of the older parts and unfortunately there is not a reference design.
1). When you say "break permanently". Does it mean when it breaks you have to power down and up to get it going again? Or you have to replace the SGMII input…
Part Number: DS15MB200 I found some old threads from 2014 talking about using this chip, DS15MB200, for an SGMII Mux. I was wondering if this was an acceptable solution to needing a SGMII MUX. If so are there any reference designs or anything like that…
Part Number: DS15MB200 Other Parts Discussed in Thread: SCAN15MB200 Hi Team,
Please Provide the DS15MB200 Pre-emphasis gain level @ 1GHz(2 Gbps) .
How much max length lossy channel will be get the good eye using DS15MB200.
Please provide the eye…
Part Number: DS15MB200 Hello All,
For the part DS15MB200TSQ Request clarification on the datasheet specification of input clamp voltage under the Electrical Characteristics. Does it mean that the input pin can go below GND by 1.5v max & current should…
Hi Kay,
Thanks for the background information.
If VDD is not provided, then the DS15MB200 will not output a signal. Although there is an internal 100-Ohm differential termination, the VDD supply is still needed to power the receive buffer and output…
Other Parts Discussed in Thread: DS15MB200 , SN65LVDS104 hello,
I would like to have the schematic diagram for the two data DEMO boards of the DS15mb200 and sn65lvds104。
Hi Hasith,
Thanks for your post, and our apologies for the delay in response.
Please see answers regarding your questions:
1. The only app note I could find that specifically involves the DS15MB200 is a White Paper we released for LVDS Signal Conditioners…
Other Parts Discussed in Thread: DS15MB200 The DS15MB200 LVDS buffer mentions "Hot Plug Protection" in the datasheet, but no details are given.
The Absolute Maximum Ratings limit input pins to VDD+0.3V, so when the DS15MB200 is not powered, no signal…
