Part Number: DS92CK16 Other Parts Discussed in Thread: LMK61E0M We are planning to use DS92CK16 in our design. We are using this part to connect the CLKOUT signal to a clock synthesiser input. Our design is very sensitive to clock jitter. I want to understand…
Part Number: DS90LV028A Other Parts Discussed in Thread: DS90LV048A , DS92CK16 , , SN65LVDS048A , SN65LVDS1 , DS90LV027A Hello,
My customer have noise issue on their production board. To solve this issue, at first I proposed to boost failsafe function…
James
I would look at the DS92CK16 which is a 'BLVDS' clock buffer. BLVDS is a technology developed by National Semiconductor before the MLVDS standard was released, which is quite similar (B is for Bus, M is for Multipoint).
The DS92CK16 is a 1:6…
Hi Kang, Thanks for folllowing up here.
After looking at your suggesting I have some question.
without looking at start all again from a different clock source, looking at the data sheet of you suggested, you said looking at the High and low current…
Hello Mike,
This problem could be caused by the large shift in common mode that the receiver encounters when the inputs are pulled to Vcc as the driver outputs go into a high impedance state. The section about "Terminated Failsafe" in this app note…
