Part Number: DP83TG721S-Q1 Hi, I refered following URL to confirm device driver for DP83TG721S. www.ti.com/.../ETHERNET-SW However, it seems that you prepare only for DP83TG720. Can we get device driver (Linux/RTOS either is fine) for DP83TG721S ? Best…
Part Number: DRA750 Tool/software: Linux Hi,
I use RGMII port 0 interface directly connect to Ethernet SW IC (Marvell 88E6390X) but the ethernet status(ethtool link detected) is always link down.
Would RGMII interface can directly connect to ethernet…
Part Number: SW-EK-TM4C1294XL Tool/software: Code Composer Studio We would like to add ethernet LAN to our existing TM4C1294 boards, that currently use USB. However we would like to keep USB as well (don't need high-speed usb).
Examples from Tivaware…
Part Number: PRU-ICSS-INDUSTRIAL-SW Other Parts Discussed in Thread: TMDXICE110 , SYSBIOS Tool/software: TI-RTOS Hi Experts,
I'd like to evaluate new EtherNet/IP software on the following environment. When I load and run the program, an exception occurs…
Part Number: PRU-ICSS-INDUSTRIAL-SW Other Parts Discussed in Thread: AMIC110
HI Team,
Do you have a plan to support EtherNetIP Quick Connect?
The customer wants to have it to use AMIC110.
Does AMIC110 have a capability to support it if QC…
Part Number: TMS320C6678 Tool/software: TI-RTOS Hi,
In one of our project, we are using C6678 DSP.
But in our DSP, out of two SGMII ports (SGMII_0 and SGMII_1), SGMII_0 is connected as default in hardware.But later we faced issue with SGMII_0 that…
Part Number: DP83867IS Hi,
1.Could you tell me how the internal behavior of PHY changes depending on the setting value (0x5/0x4/0x3) of VTM_CFG (address 0x 0053)?
2.Could you tell me the conditions and cases where using 0x3 is recommended?
The background…
Hi,
Can you please provide more background info on this request?
The DP83848-EP has been tested and compliant to the electrical and timing spec as listed in section 4. specification of its datasheet.
There is a Linux driver available for DP83848…
Hi,
Driver is available at this link: https://www.ti.com/tool/ETHERNET-SW
you should be able to replicate this with DP83868EVM but you will need to connect the EVM to RGMII MAC. For SGMII, you can either connect to another EVM which can change to…
Other Parts Discussed in Thread: OMAP-L138 , TMS320C6748 We've successfully finished a project where we utilized C6747 processor. Our new project has a C6748 and I'd like to get a little help on this.
We have many new interfaces in the new project…
