Part Number: INAEVM Tool/software: Dear team,
Could you please provide the Gerber Data for INAEVM-SO8?
Our customer would like to incorporate this EVM to thier system.
so, they would like to know more INAEVM-SO8 Mechanical Drawing data.
Best…
Part Number: INAEVM Tool/software: Hello all,
Please provide the design data in Altium for INAEVM-SO8 (INA126UA). We need the schematic/Layout symbol. There are very basic symbols available on other sites available.
Thanks,
Nilesh S.
Part Number: INAEVM-SO8 Other Parts Discussed in Thread: INA828 , INA129 Hi,
in order to implement an analog-to-digital conversion (input range of at least -6V to +6V) I wanted to check and survey some instrumentation amplifiers which are intended for…
Part Number: INA826 Other Parts Discussed in Thread: TINA-TI , INAEVM-ALT-SO8 , INA821 I am designing circuit to measure microamps of esp32 in sleep modes. I am beginner in this field. I am thinking of using INA826 amplifier. It will be used as low side…
Hi Henrik,
Henrik Rosenø said: But what's the difference between the https://www.ti.com/tool/INAEVM-ALT-SO8 and the https://www.ti.com/tool/INA826EVM ?
The https://www.ti.com/tool/INAEVM-ALT-SO8 is the alternative solution. Please review both schematic…
HI Priyanka,
I assume you are referring to the INA849 as shown on the title of the post, and INA848 in the description above is a typo, since you require gain=1V/V, and the INA848 has a fixed gain of 2000V/V. Let me know if this is not the case.
1…
Part Number: INA849 Other Parts Discussed in Thread: ADC3643EVM , , INAEVM-ALT-SO8 , ADC3643 Hello TI Team,
I am currently working on the INA849 that I would like to use to feed the input of an ADC3643EVM board.
It is connected to a square wave generator…
Hi Manoj,
I did not find specific TC EVM, but we have universal instrumentation Op Amp EVB, which it will make your design slightly easier.
https://www.ti.com/tool/INAEVM-SO8#technicaldocuments
https://www.ti.com/lit/ug/sbou122b/sbou122b.pdf?ts…
Part Number: LM3409HV Other Parts Discussed in Thread: LM3409 , Tool/software: I am working on a design for an LED Driver using the LM3409HV. The input voltage is 48V and the board is required to drive different LED strings from 3.5A, to 4.5A maximum…
