Part Number: ISO1643 Other Parts Discussed in Thread: INA236 , Hi Team,
I have troble INA236 with a isorator which VOL=0.6 to 0.8.
I am planning to use ISO1643 with INA236. Is this Okey?:
[Vcc is 5V] Host<-->(SIDE1)ISO1643(SIDE2)<-->INA236 [Vcc…
Part Number: ISO1643 Other Parts Discussed in Thread: ISO1641 , ISO1642 , Hi,
I´ve to isolate 2 I2C busses.
Is it possible to use the two bidirectional pathes SDA1(2) / SCL1(2) both for data and use the unidirectional GPIO channels for clock (SCL…
Part Number: ISO1643 Other Parts Discussed in Thread: ISO6720 , ISO1640 , TCA9800 Hi Team,
We are looking for a part similar to the ISO1643DWR, with four channels, where two channels are used for the I²C signals (SCL and SDA) and the other two channels…
Part Number: INA236 Other Parts Discussed in Thread: ISO1643 , INA237 Hi Team,
From the datasheet of VIL, can I understand the maximum 0.4V means the threshold that regard as low will not exceed 0.4V? We measured the SDA low voltage level is about 450…
Part Number: TCA9511A Other Parts Discussed in Thread: INA236 , , TCA9803 , ISO1643 Hi team!
1.Could you please tell me whether the TCA95711 really recognizes low level at 0.3*Vcc?
2. I would like to use the INA236 to communicate with an isolator…
Part Number: INA3221 Other Parts Discussed in Thread: INA296A , INA226 , ISO1643 Tool/software: I am wondering if possible to use INA3221 for monitoring bus and shunt voltage on a negative rail. The negative rail is -5 V supplied by the linear regulator…
Part Number: ISO1641 Other Parts Discussed in Thread: ISO1640 , ISO1642 , ISO1643 , ISO1644 , ISO6441 Team,
Assuming that you have an e xisting HW design/PCB for ISO1641(unidirectional, 2 ch) : -Can the ISO1640 be used a P2P drop-in for ISO1641? Or…
Part Number: ISO1540 Other Parts Discussed in Thread: LMP7712 , , ISO1642 , ISO1643 , ISO1644 , SN6501 , UCC12040 , UCC12050 , ISO1640 Hi Team, May I ask for help? Our customer have a concern, they were planning to use ADM3260 I2C and power isolator from…
Part Number: ISO6762 Hello,
we were wondering, why the ISO6762 is neither listed in the UL File No. FPPT8.E181974, nor in the UL-CA-L181974-24-32205102-8, even though it is mentioned under "PRODUCTs COVERED" in "USR/CNR - Single Protection, Non-Optical…
