Part Number: LM2587 Hi TI,
Do you sell factory seconds for LM2587 products?
Or do you have any distributors I can approach for factory seconds of LM2587 products?
Regards
Karthick
Hello Gerald,
I have not seen an update from you for the last 15 days, so I assume the question has been answered. I close this thread now. If there is still something open, please reply and the thread will get opened again. If you have any other question…
Part Number: LM2587 Hi all,
I am using webench to design a HV power supply and it requires a transformer but in the BOM it says custom along with some specs.
The specs are
Ns1toNp = 10 Lp = 97.37 µH Leakage_L = 1.95 µH
Does this mean it is…
Part Number: LM2587 Customer Zhejiang Lancoo feedback that they receive LM2587SX-ADJ/NOPB 1000PCS, batch number: 1058381EM1, DC: 2108+5. During the process of using this batch of regulator tubes, it was found that the color of the device pins changed from…
Hi Jim,
A few things to note in this schematic:
1) Output should be sensed from VOP1. It is not marked clearly on the schematic.
2) Compensation network will need to be checked on the bench
3) Add space for input and output bulk capacitor alongside ceramic…
Part Number: LM2587 Hi Team,
The power input voltage is 6~7V, the input current is about 0.9A, and the output voltage is 12V. The currently selected tantalum capacitors, C4 and C5 are 220uF/16V, and the inductance is 100uH. At present, customer find that…
Part Number: LM2587 Hello
I need to get an lm2587 simulation file. Webench doesn't cover my project. But I couldn't find from TI Website.
Is there any model that can be similar with lm2587's electric model.
Part Number: LM2587 Other Parts Discussed in Thread: LM5157 Dear TI Expert,
I have a LM2587 design, which is based on the datasheet.
After I run the same parameters on the Webench, the result is pretty scary. the inductor in the datasheet is 33uH, but…
Part Number: LM2587 Other Parts Discussed in Thread: LM5155 , Hi!
I would like to design a multiple output flyback converter operating from 9–15V based on the LM2587T–adj device, for a Cathode Ray Tube, Power Supply board, with the following outputs:–
…