Part Number: LM306 Other Parts Discussed in Thread: LM311 Hi,
Good day,
We have input of 0V to 12V with 120KHz PWMs at Non Inverting Pin, and 6V reference at Inverting Pin,
Supplies are -5V & 12V
It is Push Pull amplifier, hence we are not given…
Part Number: LM306 Other Parts Discussed in Thread: LM311 Hi,
Good Day. I have a customer who is working with LM306. Please see below his query for your reference. Thank you very much.
Can I use that device LM306 to switch the voltage between +6V…
Part Number: LM306 Hello Team,
Good day.
My customer, using LM306 and wanted why the Voh is +15V, Vol is near 0V when Vcc+ is set to +15V, and the Vcc- is set to -5V.
If 'LM306' can't work with Vol=-5V/Voh=+15V. Could you help to recommend some…
Part Number: LM306 Hi，
I'd like if LM306 output is push pull output，datasheet describes it is push-pull output ,but the product folder is open-collector or open-drain output, so please help confirm.
Best regards
Kailyn
Part Number: LM306 Other Parts Discussed in Thread: LM311 Currently we use this old design in our test boxes. I need to simulate its performance and have a recommended replacement just in case.
Other Parts Discussed in Thread: LM306 , UCC27517 , TLV1805 , SN65LVDT41 , AM26LV31 Hi,
we are using a SPI-transmission in a rough environment with random transient fields, which are sometimes disturb the transmission.
The idea is to shift the levels…
Part Number: LM6511 Other Parts Discussed in Thread: LM319-N , LM311 , LM306 Hello
I Would like to Desigh Zero Crossing detector Using LM6511 or LM319. Input is 100kHz Inverter current from a Resonant mode Controller.. I Simulated using LM6511, But…
Unfortunately there is no model available for LM119 or LM306.
I will close the other post for the LM306 and do my best to help you with your application need as best I can.
May I ask if you can share any details regarding your application and what…
There are several 10 V, high-speed comparators , but none have the output you want. (The TL3116's outputs are too weak; the LM306's output can sink enough current, but cannot source it.)
It would be possible to combine one of those comparators with…
