Part Number: LM4051-N HI, Staff
Is solder cleaning possible?
If possible, please let me know if there are any conditions
LM4051CIM3-1.2
In order to apply moisture-proof treatment to the board, they wanted to check whether it would be possible…
Part Number: LM4051-N Hello,
My understanding is the finish LM4051AIM3 and LM4051AIM3 NoPb parts is just standard SN..
I found the below, is it performed on LM4051AIM3 and LM4051AIM3?
Link to the document Lead finish composition & tin plating…
Part Number: LM4051-N
I got two LM4051-ADJ's and when i wire them according to the datasheet they do not vary the output voltage at all. I first tried them with a source of 4.85 V and a Rs of 470ohm so it would not go over the 12mA limit and no voltage…
Part Number: LM4051-N Hi,
I am a Lead Engineer at Collins Aerospace, Bangalore. I am using "LM4051BEM3-1.2/NOPB" in my product. As per the datasheet, this component has an extended temperature range of -40C to 125C. But as per the data given in 'Packaging…
Hi Charles,
The LM4051-N can work for negative voltages since it is more of a smart diode. Just make sure you have a larger negative voltage you can use for regulation. The cathode still has to be on the higher voltage than the anode.
Part Number: LM4051-N Other Parts Discussed in Thread: REF2033 Hi Team,
I am looking for a referrence voltage of 1.65V for op-amp.
I did simulation with LM4051AIM3-ADJ, but when the load current changed, the VREF voltge changed as well.
Could you…
Part Number: LM4051-N Hello,
I am having an issue with LM4051-ADJ.
I attached my simulation in PSpice with included equation from datasheet and their results.
Link to the model I used in my simulation.
LM4051_ADJA1P212 Unencrypted PSpice Transient…
Part Number: LM4051-N Hello,
Is there something to be said against the use of this LM4051-N reference diode in a dynamic application? To limit the high level of a square wave signal (period: 1/128 sec) from 3.3V down to 1.225V? In a simulation this…
