Search tips
Showing 21 results View by: Thread Post Sort by

  • LM61480: LM61480 to a Vout of 0.95V

    TI Thinks Resolved
    Part Number: LM61480 I was planning on using the LM61480 for the 5V to 0.95V, but it appears that part can only go down to 1V because of the comparator. Anyway you can drop to 0.95V. That rail is 6A, so I liked going with the 8A part (61480). The 62816…

  • LM61480: Question on Inductor Selection for LM61480

    TI Thinks Resolved
    Part Number: LM61480 Hello, I have a question on calculating the Inductor value for the LM61480. Equations 5 and 6 in the datasheet don’t seem to correlate to each other. Can you clarify what equation 6 is for? My variables are Vin = 12V; Vout…
    • Answered

  • LM61480-Q1: Power management forum

    Resolved
    Part Number: LM61480-Q1 Other Parts Discussed in Thread: LM61480 Hi , I'm an Electronic engineer at Serma ENGINEERING in France (Toulouse) ; We are working on a buck converter design using the LM614 series; we started testing the LM61495EVM (10A current…
    • Resolved

  • LM61480-Q1: what does the device marking mean

    TI Thinks Resolved
    Part Number: LM61480-Q1 Hi Expert, what does the device marking mean? Thanks. BR, Elec Cheng
    • Answered

  • RE: LM61480: Ringing internal voltage regulator (VCC) - conducted EMI problem at 120 MHz

    Resolved
    Hi Daniel, On my end, I checked the LM62460RPHEVM and measured VCC using the VCC test point and AGND connection. The VCC ringing that you measured may be a byproduct of SW noise coupling to VCC probe. If you measured both VCC and SW at the same time,…
    • Answered

  • LM61480: flow soldering

    Resolved
    Part Number: LM61480 Hello Experts, I would like to know whether this device(VQFN-HR) can be flow soldering. Would you tell it? I don't think it can be done but it is just confirmation. Best Regards, Fujiwara
    • Resolved
    • Answered

  • LM61480-Q1: Designs with LM61480QRPHRQ1 do not Export to TINA-TI and WEBBENCH Simulation with LM61480QRPHRQ1 does not simulate an Input Transient properly when set to low current outputs.

    Resolved
    Part Number: LM61480-Q1 Other Parts Discussed in Thread: TINA-TI , LM61480 , PSPICE-FOR-TI , LMR43610-Q1 Our IT Department just installed TINA-TI on my laptop today 5/06/2022. I have several designs on the TI WEBENCH Power tool involving DC-DC converters…
    • Resolved

  • LM61495-Q1: Difference between LM61495, LM61480, LM62460

    TI Thinks Resolved
    Part Number: LM61495-Q1 Other Parts Discussed in Thread: LM61495 , LM62460 , LM61480 Hi I see in the datasheet that for the three part numbers: LM61495, LM61480, LM62460 they are rated for 6A,8A, and 10A, and are drop-in pin-compatible. However, I don't see…
    • Answered

  • LM61480-Q1: LM61480-Q1 schematic review

    Resolved
    Part Number: LM61480-Q1 Dear Team Good day Our customer use the LM61480-Q1 in their application , please help them them to review the schematic ,Please review it & provide feedbacks. Wide_Input.pdf BR, Leon.liu
    • Resolved

  • LM61480: 12V-24Vin, 12vout, 8A

    TI Thinks Resolved
    Part Number: LM61480 Hello, In this application, the customer will have either 12Vin or 24Vin and they need a regulator to buck that down to 12V, output current up to 8A. If the input is 12V they don't need to regulate it we can just pass it through.…

Didn't find what you are looking for? Post a new question.