Part Number: LM6511 Other Parts Discussed in Thread: LM319 , LM319-N , LM311 , LM306 Hello
I Would like to Desigh Zero Crossing detector Using LM6511 or LM319. Input is 100kHz Inverter current from a Resonant mode Controller.. I Simulated using LM6511, But…
Part Number: LM6511 Other Parts Discussed in Thread: TINA-TI , LM311 , TLV1805 Dear TI Team,
We are planning to use LM6511 for our oscillator design. But on its TI page, there is no simulation model for this IC.
It will be of great help, if you can provide…
Other Parts Discussed in Thread: LM6511 , LM311-N Hello.
I want to ask about pin5 and pin6 (BALANCE) of LM6511.
Please show the reference circuit doing offset adjustment with this balance pin. And please tell connection when I do not use the balance pin…
Part Number: TL331 Other Parts Discussed in Thread: LM311 , LM6511 , LM319 Hi,
May I know the TL331 GND pin level spec?
Is it okay to use negative voltage? If yes, what is the limitation? -36V or VCC-GND= with in 36V Abs.?
Thanks and Best regards,
Tig…
Part Number: LM311 Other Parts Discussed in Thread: , LM6511 , LM211 Hi team,
What is the difference between LM311, LM311-N and LM311-M?
I can't see big difference between them on the internal circuit in the DS.
I would like to use it for GND standard…
Hello Sunney,
As Clemens stated, it can be used with split supplies.
The output will swing -3.3V to +3.3V, or -5V to +5V. (V- to V+). It will not swing from 0V (GND).
Note that the input range will be Vdd to Vcc-1.5V, or -3.3V to +1.8V or -5V to +3.5V…
Other Parts Discussed in Thread: CD40109B , LM6511 , LM311 Hi,
We have to level shift 15V to 5V, which is input to gate driver. So,can you suggest TI parts with low propogational delay for the same.
Part Number: LP211 Other Parts Discussed in Thread: TLV1702 , LP311 , LM311 , LM6511 , LM319 Dear Team,
our customer looks for a window comparator for:
VIH=5V, VIL=-5V.
For Vin>VIH or Vin<VIL, output "1".
For VIL<Vin<VIH, output "0".…
Hello Steby,
As Kai said, the valid input range does not extend to GND. You need a comparator that includes GND in the input range.
The LM311 has a "unique" pinout, and most of the newer devices use more common pinouts - so there is not a "modern…
