Hello Frank,
The Spice model will not be helpful for our simulation.
Does EN and IN pin have clamping diodes internally for LM73605? Because we are doing the conducted transient, we are seeing some negative transient voltage at these pins.
From the datasheet…
Part Number: LM73605 Hi,
The normal device switching frequency is 500kHz (2us), while the defective device switching frequency is 800kHz (1.25us). Also, the output voltage of the normal product is about 5V, while the defective product is about 4.7V.
…
Part Number: LM73605 Other Parts Discussed in Thread: LMR51450 , TLVM13660 , LMQ61460 Hi Experts
could you suggest me two solution to replace MP4470?
one is lowest cost and the other is performance
BRs
Brian
Part Number: LM73605-Q1 Other Parts Discussed in Thread: LM73606 , LM73605 Hello, I have a small doubt, please clarify. I'm referring to the datasheet of LM7360x-Q1 from TI website for accurate efficiencies of LM73605 & LM73606 at Vin = 12V, I(Load) =…
Part Number: LM73605-Q1 Hello,
If the bias pin is kept floating; what will happen to SYNC pin working( in design, it is connected to VCC pin). What will happen to IC functionality
Part Number: LM73605-Q1 Hello,
VCC pin capacitor design guideline says use of 2.2uF. If this capacitor is not mounted properly in design, what will be impact.
Part Number: LM73605-Q1 Other Parts Discussed in Thread: LM73606 , LM73605 Hi, the LM73605 & LM73606 are parts from the same family. Also they share a datasheet. The only difference what I see is, that the current limitation is different. Is for both…
Part Number: LM73605-Q1 Hi Team,
There is a good new that we could DIN TI product! But cause LM73605QRNPRQ1 is out of stock !
Could you help find out alternative solutions for the parts below? (can be supplied normally at present would be better ) THX