Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: LMV331-Q1 Other Parts Discussed in Thread: TL331LV-Q1 Tool/software: TI Team,
Waht is LMV331QDBVRQ1 VICR for 3.3V single supply operation condition?
I ask as device datasheet provide VICR for 5V single supply only....
Part Number: TCAN4550EVM Other Parts Discussed in Thread: LMV331-Q1 , TCAN4550 Tool/software: Hi team,
Currently, the development board is only connected to the power supply, with no other circuits connected.
Upon startup, I measured 15mA. After four…
Part Number: LMV331-Q1 Other Parts Discussed in Thread: LMV393-Q1 , Hi team,
We want to know the expected failure mode of LMV331-Q1 and LMV393-Q1.
We are particularly concerned about whether there is a failure mode that can lead to fire hazards.
Could…
Part Number: LMV331-Q1 Other Parts Discussed in Thread: LM2903-Q1 Team,
could you please share a qualification summary for the Automotive qualification of the LMV331-Q1?
Couldn't find any reference to AEC-Q100 in the datasheet.
Thanks and best regards…
Part Number: LMV331-Q1
Hello
What is the offset voltage of 7mV in datasheet of lmv331-q1 is the offset voltage of each pin of IN +, IN- input?
Or is it the offset voltage between IN + and IN-?
Is it the same concept as offset of general opamp…
Hello Yutaro-ssan,
At the time the LMV331-N device was released (late 1990's), they did not perform CDM tests.
Since this is not a Q1 device, and a legacy National device, there was no incentive to perform the CDM test.
I did dig through all the available…
Part Number: TLV3502-Q1 Other Parts Discussed in Thread: TLV7034 , TLV3502 , LMV331-N Hello:
The customer designed two peak sampling circuits using TLV7034 and TLV3502 respectively, with the same parameters. However, when using TLV7034, it was found that…
Hi Paul-san,
Thank you for your support.
We are examining the DBV package of LMV331-Q1 and D package of LMV393-Q1.
Actually, there is a gap between the ambient temperature and the substrate temperature, so I'm glad to know θjc.
I understand that…
Other Parts Discussed in Thread: LMV339 , LMV331 , LMV339-N Hello TI Support. We are using the LMV339 oparating at 3.3V.
Q1. We need to know, if the output has a known state when the input terminals is at VCC?
Q2. If IN+ is at 2.5V and IN- is liftet up to…
