Part Number: LMZ34002 Other Parts Discussed in Thread: LMZ36002 Hi TI,
LMZ34002 is out of stock. Could you please help me find an alternative.
I need to make -15v from 24v input. output current minimum of 0.5A.
Part Number: LMZ34002 I am designing a circuit that requires the regulator to be off completely until commanded by an FPGA. I am controlling the inhibit pin with a normally closed solid state relay, such that the INH is pulled low until it's commanded…
Part Number: LMZ34002 I am trying to simulate LMZ34002 unencrypted model in PSPICE 17.4 and having issues just running a transient analysis. I get ERROR(ORPSIM-15141): Less than 2 connections at node CLK. In my schematic, I have CLK floating (with a alias…
Part Number: LMZ34002 I have been running simulations in PSPICE for the LMZ34002. When I modified the steady state design to incorporate a load step, I am seeing that the when the step occurs, an overshoot happens and then settles back to -15V. When the…
Part Number: LMZ34002 To set an output voltage of -15.5V, Webench recommends a 205k resistor for Rset. (11-34V input, -15.5V output, 60C operating temp)
The datasheet specifies using 187k resistor for Rset to get -15.5V output.
See Table 3 of the datasheet…
Part Number: LMZ34002 Other Parts Discussed in Thread: LM2574 , Hello,
I have LMZ34002RKGT DC-DC converter and TPS7A3001MDGNTEP LDO. Should I use heatsink with this parts?
Thank you in advance.
Behtan Umut Mercan
Part Number: LMZ34002 Other Parts Discussed in Thread: DAC81416 , Greetings community,
I'm currently having a ripple issue using the LMZ3004 as a inverter to generate -12V from a 12V input. It is current limited at 700 mA by a current limiter IC. The -12V…