Part Number: TPS735 Other Parts Discussed in Thread: LP38693 , , LP38692 , TPS737 , TLV759P Hello support team、
I'd like to propose two types of LDOs which start-up fast to our customer. The required specifications of LDOs are as follows.
[LDO1] Input…
Hello,
I don't think 350mA is the current limit of LP38693. There are 2 (two) LP38693s on the 913A EVM. LP38693 is 500mA load capability LDO.
The 350mA inrush current may be just charging current into the filtering capacitor of the LDO supply voltage…
Hi,
Yes, the gate of P-Mos, 1M87, 1M and the comparator ouput are connected.
The delay of the TPS63000 (U5) is about 100ms.
The range of the power supply is 4 to 5.5V and could sometime increase up to 5.6V. I know this voltage is out of the standard…
Hi Junqiang, Thanks for your reply.
We need confirm one thing.
Is save when use external 3.3v (jp5) to turn on EVM? Because on EVM user guide page22, we saw 3.3v looks connect LP38693 output.
We worries it's possible to burn on our EVM if we use…
Other Parts Discussed in Thread: TPS7A26 , TLV767 , LP38693-ADJ , LP38691-ADJ Hi Team,
There is a good news that we have a chance to replace "NCP3335AMN330R2G"
Do we have a solution to replace "NCP3335AMN330R2G" ?
The URL below is "NCP3335AMN330R2G…
The LP38693 has a minimun regulation voltage of 1.25V, therefore the circuit can be implemented to limit current as long as the limitation occurs above this voltage level.
For Vout >0 and <1.25V the output will be limited by the regulator itself. Please…
Part Number: LP38692-ADJ Other Parts Discussed in Thread: LP38693-ADJEV Hi Team
. Could you send me Gerbers and schematic for AN-1757 LP38693SD-ADJ Evaluation Board please, because they are missing from your webpage?
Part Number: TPS7A16 Other Parts Discussed in Thread: LP38693-ADJ Hello Team,
can TPS7A1601 be used as a current source for 5...10mA and a voltage of 50V similar to the LED schematics shown in TIDU922A ?
Can you provide the schematics for such an…
Other Parts Discussed in Thread: LP38693 , LP38692-ADJ Hi There,
We have a battery powered application that consumes typically a few tens of uA in its low power mode.
The system uses two LP38693 regulators: -
LP38693SD-3.3
LP38693SD-5.0
…
