Part Number: LP87562-Q1 Hi,
We are using LP87562PRNFRQ1 regulator in our project. May I know after what time the device will shut down after the temperature reaches 130°C and 150°C (Thermal warning and thermal shutdown)? I want to know the same details…
Part Number: LP87562-Q1 Could you please help to confirm if default setting for slew rate is ‘4h’(3.8 mV/μs), for LP87562PRNFRQ1?
IIC is not used and not connected in our schematic.
Part Number: LP87562-Q1 Hi Team,
Could you pls help recommend alternative for MPF5024AMMA0ES? The requirement are:
buck1, 1.5A 0.8V
buck2, 2.25A 1.8V
buck3. 2.55A 1.1V
buck3. 2.5A 1.1V
Besides, pls recommend alternative for MC33PF8100. Thanks.
Best regards…
Other Parts Discussed in Thread: LP87564-Q1 , LP87561-Q1 , LP87565-Q1 , LP87562-Q1 , LP87563-Q1 , LP8756-Q1 This thread applies to LP87561-Q1, LP87562-Q1, LP87563-Q1, LP87564-Q1 and LP87565-Q1 devices.
LP8756x-Q1 devices have multiple different part numbers…
Part Number: LP87562-Q1 Hi team
After checking the LP87562Q1 we would like to ask a question that could we separate the Vin pin like we provide a certain voltage Vin to Vin_B0 and provide the other voltage Vin to Vin_B1/2/3, is it ok for the LP87562Q1…
Part Number: LP87562-Q1 Hi team,
customer use LP87562-Q1 buck3 to power supply DDR, the current is very small. they found that when power down, the voltage of BUCK3 decrease very slow,
see the below waveform. read register, the discharge resistor is enable…
Part Number: LP87562-Q1 The configuration guide(SNVU590) states,
It is recommended that the ENx pins be driven low to until the device is configured to the desired settings.
Can the driving of the Enable pins during configuration be accomplished with…
Part Number: LP87565-Q1 Other Parts Discussed in Thread: LP87562-Q1 Hi team,
In some case, customer will use 1 phase, for unused channel FB, how to handle? Must connect to GND? Or we can left it float?
If customer use LP875620, 3ch in 1, since customer…
