Part Number: MCT8315EVM Tool/software: Dear Team,
My customer is evaluating the MCT8315EVM with their motor. Since they would like to refer the PCB layout of it, they want to know the PCB information of the MCT8315EVM.
Can you please let me know the…
Hi Tyler,
There will not be torque ripple in FOC and we have specification of speed error of up to 2.5% under extreme temperature conditions with internal clock and up to 1% with external clock conditions.
Thanks and Best Regards,
Venkatadri S
HI Marco,
Marco Bernold said: What is the advantage of the extended commutation period and how is it determined?
There is no specific advantage to the commutation period being extended during the open loop operation. These extended commutation times are…
Part Number: MCT8315EVM Other Parts Discussed in Thread: MSP430FR2355 hello,
I bought an evaluation board but I have a problem, it's not possible for me to connecte GUI on the board. Maybe there is a problème with MSP430 Firmware. I Read the manual and…
Part Number: MCT8315A Other Parts Discussed in Thread: MCT8315EVM Tool/software: Hi,
I use the MCT8315A chip and I'm confused because I have 2 conflicting data:
The pin 22, 23, 24 and 25 must be leave floating (sllsfp7a document).
but the MCT8315EVM…
Part Number: MCT8315A Other Parts Discussed in Thread: MCT8315EVM , Hello team,
On the GUI for MCT8315EVM, there are several DACOUT Variable Selection as below.
However, there are no description on the datasheet or tuning guide for MCT8315A. For example…
Hello Venkatadri-san,
Forget about the previous questions. I have new questions.
Q1:
Is Buck in Resistor mode = LDO operation? Because I have never seen Buck switching Regulator without Inductor.
Q2:
On the MCT8315EVM, it is configured in Buck in resistor…
Hi Kevin,
I would recommend taking a look at the MCT8315A's product page on ti.com, https://www.ti.com/product/MCT8315A, for a quick overview of the MCT8315A's features and parameters.
For more in depth descriptions of the features available on…
Part Number: MCF8316AEVM Other Parts Discussed in Thread: MCT8315EVM , MCF8315EVM
Tool/software:
I am working with a custom with the following specifications:
4 poles
Resistance: 3.4 Ohms
Inductance: 40 uH
BEMF Constant: 10 mV/Hz
Rated current: 500 m…
Hi Joe,
We are working on publishing this to the EVM tool folder. For now please reference this E2E post for a GUI firmware that is compatible with the MCT8329EVM: https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/1207840…
