Part Number: BQ24650 irfr7546pbf.pdf
BQ24650 mosfet select issue , i select IRFR7546,Vgs=2.1-3.7,Vds=Vgs Id=100uA. the BQ24650 datasheet 9.2.2.4 show there is 6v, but dont have Current ,? if the IRFR7546 COULD MATCH with bq24650 ?
Other Parts Discussed in Thread: DRV5013-Q1 Dear Sir
Could you please promote a TI automotive hall sensor to replace MLX92212?
Project: sun screens--Automotive
Run rate:500K/Y
Thank you !
MLX92212-Datasheet-Melexis (1).pdf
Yuval,
Output phase matching between channels was not required when doing board layout.
Routing some of the analog inputs to internal or bottom layers will allow you to avoid the crisscrossing. See attached for more board layout tips.
Regards, …
Hi Board designers,
DDR4 on AM62x supports dual rank.
Additional E2E references for AM62x related to DDRSS
am currently working on an EVM schematic in Altium and am trying to connect the AM625 to a LPDDR4 memory. However, the only 1x16 LPDDR4 option…
Part Number: BQ40Z50-R1 Hi
The customer test with BQ40Z50-R1, the problem is a fter discharging from 68% to 8% and manually stopping it, let it sit for a while and the SOC will rise back to 9%.
The CHEM ID is selected and full learning.
Attached…
To unseal the gauge, see attached document. section 8.3
6266.slua421a[1]_quick start guide for bq20zxx family gas guages.pdf
for further details on using SHA-1 see attached document.
slua359[1]_using SHA-1 in bq20zxx family of gas guages.pdf …
Hi,
Yes, you need to change the values of Caps in small increments/decrements to adjust the Frequency accuracy.
Attached is the App note SWRA640 on the guidelines for Hardware Configuration and PCB Layout for further reference.
swra640a.pdf…
Hi Davide,
the EVM User's Guide shows a suited circuit:
sbou048c.pdf
There's another issue: DC/DC switchers like your MORNSUN thingy produce extremely high ripple noise at the input and output which can totally ruin the performance of an analog…
